Rehau PVC edgebanding 301799-278 is a PVC edge banding product that covers and protects the exposed edge of panels, so cabinet and furniture projects present a finished, professional edge rather than raw board. The 15/16 inch width stated as 15/16X1MM in the description gives coverage across standard panel thickness with a margin for trimming, which helps installers flush-trim for a tight, clean line along the face. The 1mm thickness described in the SAP text provides a solid edge profile, so edges hold up better in everyday use compared to very thin films. The CP41486 reference in the description identifies the specific design or match series, helping shops align this edgeband with the intended surface material in a run. The 600FT length listed in the SAP description supports longer production runs or multiple projects from a single coil, which reduces changeovers during fabrication.
The SAP description listing 15/16X1MM defines both width and thickness of this Rehau PVC edgebanding, so operators can dial in edgebander settings to those exact dimensions for consistent feed and pressure. The 15/16 inch width gives adequate overhang beyond typical panel faces, so trimming stations can create flush or slightly radiused edges without leaving gaps. The 1mm thickness provides enough material for clean trimming and light profiling, which helps maintain a solid, uniform edge along doors, drawer fronts, and case parts. The PVC construction noted in the product name works with standard hot-air or glue-based edgebanding processes, so shops can integrate this band easily into existing machines and hand-trimming routines.
The classification as Edge Banding and the SAP description 15/16X1MM CP41486 EMB LAC 600FT identify this product as a coil-format band for covering exposed panel edges, so it suits cabinet boxes, shelves, and fronts that need a finished perimeter. The 15/16 inch width works with common board thicknesses, so the edgeband can bridge both faces with a controlled overhang that trims down cleanly. The 1mm thickness supports straight-line and contour edgebanding on standard woodworking machinery, so shops can run parts with consistent pressure and trimming settings across batches. The PVC material called out in the product name behaves predictably under trimming knives and routers, so edges can be machined to match adjacent surfaces without tearing. The manufacturer part number 301799-278 ties this banding to a specific Rehau item, so production managers can call out the exact band on cutlists and maintain consistency from job to job.
The Rehau, Inc. branding tells installers this edgebanding is part of a defined product line, so repeating the same manufacturer part number 301799-278 across projects helps maintain color and texture continuity wherever this match is required. The CP41486 reference in the SAP description points to a defined design series, so once a shop aligns that code with a board or laminate program, future reorders follow the same reference for predictable visual results. The 600FT length supports extended runs of doors, drawer fronts, or case parts from one coil, so operators can set up the edgebander once and process many components without stopping to change material. The combination of 15/16 inch width and 1mm thickness provides a measurable edge geometry, so quality checks on finished parts can refer back to these dimensions when assessing trimming, overhang, and profile uniformity.
Rehau PVC edgebanding 301799-278 is an Edge Banding product for covering exposed panel edges, so cabinet and furniture components present a finished perimeter instead of visible core material.
The SAP description 15/16X1MM indicates this Rehau PVC edgebanding is approximately 15/16 inch wide and 1mm thick, so it provides trimming overhang and a solid edge profile.
The 1mm thickness gives the edgeband enough material for clean trimming and light profiling, so finished edges feel solid and resist minor edge abuse better than very thin films.
The CP41486 EMB LAC portion of the SAP description identifies a specific Rehau design reference, so shops can align this edgeband with the intended surface program.
The 600FT length stated in the description supports longer production runs, so operators can process many edges per coil, reducing interruptions during cabinet or furniture fabrication.
The manufacturer part number 301799-278 uniquely identifies this Rehau PVC edgebanding, so purchasing and production teams can reorder the same item to maintain appearance consistency.
The 15/16X1MM SAP description, the PVC material noted in the product name, and the 600FT length show that this Rehau, Inc. edgebanding is configured for repeatable cabinet and furniture edge work over substantial runs. The precise width and 1mm thickness support accurate setup on straight-line or contour edgebanders, so shops can hold consistent edge quality from the first part to the last. For projects that specify the CP41486 design and call out manufacturer part number 301799-278, this coil gives installers and fabricators a matched edge solution that ties directly to their documented materials list.
Sold In: 1 Roll