Rehau PVC edgebanding 301799-282 identifies this specific PVC edge banding from Rehau, Inc., so installers can match it consistently across fabrication runs and service work. The product class as edge banding defines its role as a finishing strip for exposed panel edges, creating a uniform transition that hides core material and saw marks. The SAP description 15/16X1MM CP20942 EMB LAC 600FT specifies a 15/16 inch wide, 1mm thick PVC band, giving you a proportion suited to standard panel thicknesses while allowing slight overhang for trimming. The same description also states a 600 foot length, supporting longer production runs or multi-job use from a single coil without frequent material changeover. The identifier CP20942 EMB LAC in the SAP description ties this edgebanding to a specific color and surface combination, helping shops maintain visual consistency on repeat cabinet or fixture projects.
The 15/16 inch width specified in the SAP description aligns well with common panel dimensions, giving fabricators a predictable amount of overhang for trimmers and flush routers during installation. The 1mm thickness also specified in the same description sets a consistent material profile, so edgebander pressure, heat, and trimming settings can be dialed in once and reused on repeat runs. Because this product is identified as PVC edgebanding, it is designed to work within typical woodworking edgebanding workflows where thermoplastic edges are applied with hot-melt adhesive. The defined 600 foot length supports planning for production, allowing estimators to map linear footage needs against a single coil and schedule work without unexpected material shortfalls.
The classification as edge banding places this Rehau, Inc. product in jobs where exposed panel edges need a finished PVC edge, such as cabinet components, shelves, and casework parts. The 15/16 inch width in the SAP description works with standard cabinet-grade sheet goods, giving coverage across the thickness with slight overhang to trim back to the face. With a 1mm thickness also called out, this PVC banding suits applications that benefit from a noticeable but controlled edge profile rather than ultra-thin film, providing a defined transition between face material and edge. The PVC composition named in the product title supports typical woodworking production where panels are processed on edgebanders that rely on thermoplastic edge materials for efficient throughput.
The SAP description 15/16X1MM CP20942 EMB LAC 600FT combines dimensions and identification into a single reference, helping engineers and shop managers specify the exact edgebanding in drawings and cut lists. The 1mm thickness gives enough material for precise trimming on both straight and contoured edges, supporting clean flush results while maintaining edge integrity across normal use. The 15/16 inch width allows operators to run parts with confidence that trimming will remove overhang without cutting into the face, reducing rework. The 600 foot length supports scheduling of multi-cabinet or multi-room projects using a single roll, which helps keep color and surface consistent throughout the job. The CP20942 EMB LAC portion of the description ties this banding to a defined appearance reference within Rehau, so procurement teams can match existing installations or coordinate with panel finishes specified for new work.
Rehau PVC edgebanding 301799-282 is a PVC edge banding classified as edge banding, used to finish exposed panel edges so cabinet and casework components have a clean, uniform appearance.
The description 15/16X1MM CP20942 EMB LAC 600FT indicates a 15/16 inch wide, 1mm thick edgebanding supplied in a 600 foot length, supporting standard panel coverage and extended production runs.
The 1mm thickness gives a defined PVC edge profile that trims cleanly on edgebanders and routers, providing a solid-feeling edge on cabinet and casework parts during everyday use and handling.
The 15/16 inch width covers typical panel thicknesses with slight overhang, so installers can trim back to a flush edge without cutting into the panel faces on most cabinet components.
Manufacturer part number 301799-282 uniquely identifies this Rehau, Inc. PVC edgebanding variant, allowing consistent reordering for matching future projects or additions to existing installations.
The 600 foot length noted in the SAP description supports long or repeated production runs from one roll, reducing changeovers and helping maintain consistent edging appearance across multiple parts.
The defined 15/16X1MM CP20942 EMB LAC 600FT specification gives installers clear width, thickness, identification, and length for planning cabinet and casework edging. By using Rehau PVC edgebanding 301799-282, shops can align machine setups, estimate linear footage, and match finish criteria to this exact edge banding for repeatable results across current and future projects.
Sold In: 1 Roll