Rehau PVC edgebanding identifies this product as a PVC-based edge banding from Rehau, Inc., so it is designed to finish raw panel edges and give sheet goods a defined, consistent edge. The manufacturer part number 301799-286 ties directly to this specific color and finish combination, which helps keep repeat jobs visually consistent when you reorder. The edge banding is categorized as Edgebanding within the Wurth Baer Supply product range, so it fits naturally into cabinet, furniture, and general woodworking workflows that already rely on edge banding materials. The SAP description 15/16X1MM CP60224 EMB LAC 600FT shows that this is a narrow, millimeter-based product intended for standard panel edging, rather than a wide or specialty strip. That precise description helps align this roll with common cabinet and casework dimensions in a production or shop environment.
The stated 15/16X1MM size gives a narrow but forgiving width that works well with common edgebanding machinery or hand-applied methods, since the slight width over standard 3/4 inch panels allows for trimming to a crisp final edge. At 1mm thick, this PVC material provides a defined edge profile without being overly bulky, helping it respond predictably during trimming and scraping. The 600FT length called out in the SAP description supports longer cabinet or furniture runs, so once the material is set up on an edgebander, substantial footage can be processed before a change is needed. As PVC edgebanding from Rehau, Inc., it fits typical PVC-specific handling, cutting, and finishing steps that many cabinet and woodworking shops already use in their normal processes.
The product class Edge Banding and the Rehau PVC edgebanding name position this material for covering raw edges on casework, cabinet components, and furniture panels built from sheet goods. The 15/16X1MM dimension makes it a natural match for edging panels around 3/4 inch thick where a modest overhang is preferred for post-trimming. The CP60224 reference in the SAP description ties to a specific decor, which helps when a shop standardizes on one visual for a line of cabinets or commercial fixtures. The EMB LAC description suggests an embossed and lacquered appearance that can complement panel surfaces designed to mimic woodgrain or other textured finishes, helping the edge transition look deliberate rather than exposed. With 600FT available on a roll, this material supports multi-part jobs such as full kitchens, banked office casework, or repeated production runs that rely on consistent edges from part to part.
The clear 15/16X1MM dimension in the SAP description gives installers and machine operators a defined width and thickness to set up guides, cutters, and trimmers, which helps avoid guesswork when dialing in equipment. The Rehau, Inc. branding signals that this PVC edgebanding follows a specific manufacturer specification matched to the 301799-286 part number, so production teams can document that exact reference in job travelers or cut lists. Because the decor code CP60224 and the embossed lacquered EMB LAC style are identified, designers and shop managers can call out the same code across replacement orders, maintaining appearance alignment between existing installations and new work. The 600FT roll length also aids planning, allowing estimators to relate linear footage of cabinet edges to roll counts so that jobs run with fewer mid-stream material changes. All of these labeled details help keep edgebanding steps predictable from layout through final trimming on recurring projects.
The 15/16X1MM size indicates the edgebanding is about 15/16 inch wide and 1mm thick, giving coverage for typical 3/4 inch panel edges with material left for final trimming.
The CP60224 code identifies the specific decor of this PVC edgebanding, so using the same code across orders keeps cabinet and furniture edges visually consistent on multi-phase projects.
The EMB LAC description indicates an embossed and lacquered style, giving the edge a textured, finished appearance that coordinates with matching surfaces in a design program.
The 600FT length provides a long continuous run of edgebanding, supporting extended production on edgebanders and reducing roll changes during large cabinet or casework jobs.
The 301799-286 part number uniquely identifies this Rehau PVC edgebanding, helping shops request the exact same size, decor, and finish when matching or extending prior work.
This product is categorized as Edge Banding within Wurth Baer Supply offerings, aligning it with typical panel edging tasks in cabinet, furniture, and general woodworking applications.
The Rehau PVC edgebanding with part number 301799-286 combines a 15/16X1MM size, the CP60224 decor code, and an EMB LAC finish style to support controlled, repeatable edge treatment on panel-based projects. The 600FT roll length described in the SAP details provides extended footage for production lines or multi-cabinet installations that rely on a continuous, matching edge. As an Edge Banding product in the Wurth Baer Supply assortment, it slots naturally into workflows that already specify PVC edgebanding on casework and furniture components. For projects that depend on defined dimensions, consistent appearance, and documented part references, this Rehau PVC edgebanding offers a clearly identified option.
Sold In: 1 Roll