Rehau PVC edgebanding 301799-290 is a 15/16 x 1mm PVC edge banding that covers exposed board edges so cabinet and furniture projects present a finished, unified surface. The PVC construction gives a consistent profile along the run, which supports predictable trimming and routing on shop equipment. The 15/16 inch width provides full coverage on standard 3/4 inch panels with working margin, so edges can be flushed without exposing the core. The 1mm thickness offers a solid feel at the edge, which helps panels stand up to regular handling in cabinetry and casework. The CP40721 embossed lacquer surface adds texture and sheen in one layer, so the edge visually ties in with matching components. A 600 foot length per roll supports longer production runs or multiple jobs from a single part number, reducing changeovers during edgebanding work.
This Rehau, Inc. PVC edgebanding in part number 301799-290 is supplied at 15/16 inch width and 1mm thickness, which suits standard panel constructions in woodworking applications. The width gives enough overhang to allow precise trimming equipment to bring the edge flush with the face, helping maintain a straight line along cabinet sides and fronts. The 1mm gauge carries through corners consistently, so routing or scraping operations remove material evenly without sudden dips. With 600 feet on a roll, runs of cabinet cases, shelves, or fronts can be processed in sequence, which supports uniform machine setup across a job. The defined CP40721 embossed lacquer face further helps installers orient the band correctly, keeping the finished texture consistent from piece to piece.
The Rehau PVC edgebanding, classified by Wurth Baer Supply under Edgebanding and Edge Banding, is suited to woodworking environments where exposed panel edges need a durable PVC finish. Its 15/16 inch width and 1mm thickness align with typical cabinet and furniture panel builds, so it works naturally on case sides, shelving edges, and similar components. The CP40721 embossed lacquer surface ties into matching decorative elements, helping projects maintain visual continuity between faces and edges. Because the roll length is 600 feet, the same 301799-290 material can cover a mix of pieces on a project, supporting both production shops and serious DIY users setting up multiple cabinets or storage units in one workflow.
The defined 15/16 x 1mm format on this Rehau PVC edgebanding supports repeatable machining because the band presents a predictable amount of overhang and thickness to trimming tools. That predictability reduces adjustments between panels, helping maintain straight, chip-free lines on successive parts. The CP40721 embossed lacquer finish is built into the band, so once applied, edges show the same texture and sheen without additional finishing steps, which keeps results consistent across doors, sides, and shelves. Using the single manufacturer part 301799-290 simplifies reorders when a shop wants to replicate a previous run or extend an installation, because the same PVC, size, and surface combination can be used again for matching edges.
Rehau PVC edgebanding 301799-290 is 15/16 inch wide and 1mm thick, which provides coverage and trimming allowance for standard panel edges in cabinet and furniture projects.
The CP40721 embossed lacquer surface gives the PVC edgebanding a specific textured and lacquered finish, so applied edges match the intended design look without separate finishing passes.
The 1mm thickness on this PVC edge banding creates a more substantial edge, which supports a solid feel and consistent trimming results on cabinet doors, shelves, and similar components.
The 15/16 inch width gives coverage beyond typical 3/4 inch panels, allowing installers to trim back to a flush edge while preventing the panel core from showing at the edge.
The 600 foot roll length lets shops run multiple cabinets or a longer project using one continuous Rehau 301799-290 material, helping maintain consistent setup and appearance.
This PVC edgebanding is identified by manufacturer part 301799-290 and description 15/16X1MM CP40721 EMB LAC 600FT, so the same size and finish can be sourced again.
Rehau PVC edgebanding 301799-290 from Wurth Baer Supply combines a 15/16 inch width, 1mm thickness, and CP40721 embossed lacquer surface in a 600 foot roll that suits cabinet and woodworking projects. Using this defined size and finish helps keep edge appearance, feel, and machining behavior consistent from part to part. Add this Rehau PVC edgebanding to your material list when you need a repeatable PVC edge solution matched to standard panel work.
Sold In: 1 Roll