Rehau PVC edgebanding 301799-297 is a PVC edge banding designed to finish exposed panel edges, so cabinet and furniture projects get a uniform, professional-looking perimeter. The 15/16 inch width covers standard panel thickness with a bit of overhang, giving room to trim flush for a tight visual line. The 1mm thickness provides a solid edge profile that stands up to everyday contact on doors, drawer fronts, and shelving edges. The CP41122 designation identifies the specific decor and surface pairing, so runs that share this code maintain the same visual match across a job. The embossed lacquer surface gives the banding a textured, coated finish that ties into matching board or laminate, helping panels and edges read as one finished surface. The 600ft length in a single run supports longer production stretches with fewer changeovers on the edgebander.
The 15/16 inch width on this Rehau PVC edgebanding covers the full edge of typical casework panels with extra material for trimming, which simplifies setup on automatic or manual trimmers. The 1mm gauge runs well in machinery set up for standard thin edgeband, so existing settings tuned for 1mm stock can be used as a starting point. The CP41122 embossed lacquer surface arrives as a finished face, so machining focuses on bonding and trimming rather than additional surface treatment. Because the width and thickness are fixed by the 301799-297 part, repeating the same part code helps keep equipment changeovers predictable from job to job, especially when multiple colors or textures are in rotation in the shop.
This Rehau, Inc. PVC edge banding in the 301799-297 version is suited to closing off exposed edges on cabinetry, casework, and furniture components that match the CP41122 decor. The 15/16 inch width works well on common shelf, gable, and door blanks where full coverage and trim margin are needed, so one size can carry across multiple part types. The 1mm thickness provides a balanced edge for fronts and carcass parts, adding a solid feel at the edge while avoiding the bulk of thicker strips. The embossed lacquer surface ties into panels using the same CP41122 designation, which helps doors, drawer fronts, and cabinet boxes read as a coordinated set when installed together on the same project.
The 15/16 inch by 1mm sizing on this PVC edgebanding defines how it behaves through the entire workflow, from cutting to final cleanup. With 15/16 inch coverage, operators can rely on consistent overhang for trimming without chasing exposed board edges, which supports faster throughput on straight runs. The 1mm thickness runs efficiently through standard edgebanders, and its set gauge helps dialing in trimmers, scrapers, and buffers when repeating the 301799-297 part on different projects. The CP41122 EMB LAC description defines both the texture and lacquered surface, so any component edged with this banding maintains the same look and feel as other parts specified with CP41122. The 600ft length reduces interruptions during large batch work, helping keep setups stable and visual results consistent from part to part across the entire order.
Rehau PVC edgebanding 301799-297 is described as 15/16 x 1mm, giving a near-1-inch wide strip at 1mm thickness for covering typical panel edges and allowing trimming to a flush, clean line.
The CP41122 EMB LAC description identifies the specific decor and an embossed lacquer surface, so the edge texture and finish match boards or laminates carrying the same CP41122 designation on coordinated projects.
Rehau 301799-297 PVC edge banding is specified at 600ft, allowing extended production runs on an edgebander with fewer roll changes and supporting consistent edges across larger batches of parts.
Rehau 301799-297 is described as PVC edgebanding, so it uses a polyvinyl chloride strip to cover raw panel edges, supporting a uniform look that ties to the chosen CP41122 decor.
This 15/16 x 1mm PVC edgeband is suited for cabinet, casework, and furniture components that match the CP41122 surface, helping doors, shelves, and gables share the same edge appearance.
The 1mm thickness on this cabinet edgebanding provides a substantial yet manageable edge profile, supporting a solid feel on doors and drawer fronts while remaining efficient to run on standard edgebanders.
Rehau PVC edgebanding 301799-297 combines a 15/16 inch width, 1mm thickness, and CP41122 embossed lacquer surface to support consistent, matched edges across cabinets and casework. Using this specific part number aligns edge appearance with CP41122-based designs. For runs built around that decor and thickness, this 600ft PVC edge banding keeps production moving while preserving the same textured, lacquered finish from panel edge to panel edge.
Sold In: 1 Roll