Rehau PVC edgebanding 301799-299 is a PVC edge banding from Rehau, Inc. that finishes exposed board edges so cabinet and furniture jobs get a uniform, protected perimeter. The 15/16 x 1mm size covers standard panel thickness with enough overhang for trimming, helping installers run a predictable edge workflow. The CP20761 designation identifies the specific decor, so repeat orders align visually across projects that share this part. An embossed lacquer description points to a textured, coated surface that supports a more finished look along the edge run. Supplied as a 600 foot coil, the product supports longer runs and multiple pieces from the same lot, which helps maintain color and pattern continuity on a shop schedule. As a dedicated edge banding in the edgebanding category, it fills the role of the edge finish layer in a typical panel-processing sequence.
This Rehau PVC edge banding uses a 15/16 x 1mm format that supports standard cabinet and furniture panel dimensions, giving fabricators enough material to flush-trim after bonding. The 1mm thickness provides a defined edge profile that stands up as the final edge layer in the build sequence. Because it is supplied as a 600 foot coil, shops can set up edgebanding equipment once and run longer jobs without changing material, which streamlines feed-in, cutting, and stacking tasks. The edge banding format fits directly into typical edgebanding operations where the material is applied to panel edges and then trimmed and finished as part of the same workflow.
This Rehau PVC edgebanding, classified under edge banding and edgebanding, is suited to woodworking projects that rely on laminated or engineered boards and need a finished edge. The 15/16 inch width lets it cover the edge of common cabinet carcass parts, shelves, and fronts while leaving workable overhang for trimming machines or hand tools. Its 1mm thickness places it in a range used for residential and commercial casework where a defined yet manageable edge is required. The CP20761 EMB LAC description identifies a single decor, so fabricators can tie this part number directly to specific cabinet lines or furniture runs that have already standardized on that edge appearance. The 600 foot coil length supports both small-batch fabrication and higher-volume shop work without frequent material changes.
The combination of 15/16 x 1mm sizing and PVC construction lets installers rely on a repeatable trimming and finishing routine from board to board. The Rehau 301799-299 part number links the physical coil to digital job tickets and inventory systems, so the same material is used whenever that specification appears. The CP20761 embossed lacquer designation further tightens that match, allowing consistent edge appearance across multiple orders or phases of a project. Working from a 600 foot coil reduces the number of material transitions during the day, helping maintain steady feed rate settings and cut quality. As a defined edge banding product within Wurth Baer Supply offerings, it occupies a clear role as the finishing layer along exposed edges in the broader cabinet and woodworking workflow.
The Rehau PVC edgebanding 301799-299 uses a 15/16 inch width and 1mm thickness, giving coverage over typical panel edges with enough material left for trimming after bonding.
The Rehau PVC edgebanding 301799-299 in a 600 foot coil supports longer runs and multiple pieces from one roll, keeping appearance consistent across cabinets and reducing mid-job material changes.
The Rehau PVC edgebanding 301799-299 uses the CP20761 EMB LAC description to mark a specific embossed lacquer decor, tying this coil to a defined visual style for repeat projects.
The Rehau PVC edgebanding 301799-299 is listed under edge banding and edgebanding, positioning it as the finishing material for exposed panel edges in cabinet and furniture work.
The Rehau PVC edgebanding 301799-299 part number links directly to this exact size and decor, allowing shops to repeat the same edge look on future jobs without guesswork.
The Rehau PVC edgebanding 301799-299 uses PVC as the edge banding material, serving as the final edge layer that covers and finishes exposed board edges in the workflow.
The Rehau PVC edgebanding 301799-299 from Wurth Baer Supply pairs a 15/16 x 1mm format with a defined CP20761 EMB LAC decor and 600 foot coil length, giving shops a repeatable, cataloged edge solution for cabinet and furniture projects that need consistent finished edges.
Sold In: 1 Roll