Rehau PVC Edgebanding 301799-301 is a PVC edge banding designed to finish exposed panel edges, so plywood or board cores present a clean, usable surface on cabinets and casework. The 15/16 inch width covers standard panel thickness with a small overhang, giving you enough material to trim flush without risking a visible glue line on the face. The 1mm thickness provides a substantial edge profile that stands up to normal shop handling during cutting and assembly. The CP60581 designation identifies a specific color and texture family, which helps projects keep visual continuity across multiple panels and parts. The embossed lacquer finish described in the SAP text adds a textured, coated surface that visually ties into matching decorative faces. The 600FT length noted in the SAP description supports longer production runs or multiple jobs from a single roll, reducing changeovers during fabrication.
The 15/16 x 1mm sizing listed in the SAP description defines how this Rehau edge banding fits common panel work, giving enough height to fully cover standard substrates with trim margin. The PVC construction in the product name means the material behaves predictably under typical edgebander heat and pressure settings used in woodworking shops. The 600FT length identified in the SAP text groups a large amount of edging into one continuous format, supporting extended runs on automatic banders with fewer changeovers. The CP60581 embossed lacquer designation ties finish and texture to a defined program, so installers can align edges during layout, trimming, and final inspection on coordinated components.
The 15/16 inch width from the SAP description suits panel jobs where the edge must fully cover the core with slight overhang, such as cabinet sides, shelves, and casework parts. The 1mm thickness keeps edges substantial enough for repeated handling in a woodworking shop while remaining compatible with standard trimming heads. The PVC designation in the product name supports use in typical interior woodworking environments where machinability and consistency matter during routing and scraping. The CP60581 reference and embossed lacquer detail in the SAP text make this strip suitable for projects using coordinated decorative surfaces, where a matching texture on the edge keeps visual lines consistent across doors, drawer fronts, and panels.
The combination of 15/16 inch width and 1mm thickness described in the SAP information gives fabricators a repeatable edge geometry, which simplifies setup on automatic banders and manual trimmers from part to part. The PVC material identified in the product name provides uniform behavior under heat and pressure, which supports consistent bonding characteristics across the entire 600FT length. The CP60581 designation defines a stable color and pattern reference, so replacement or expansion runs can target the same program for visual continuity over time. The embossed lacquer finish referenced in the SAP description adds a textured, coated surface that helps the edge read similarly to matching embossed panels under shop and install lighting, reducing visible transitions along cabinet rows.
Rehau PVC Edgebanding 301799-301 at 15/16 x 1mm covers typical panel thickness with trim margin, giving fabricators enough material to flush-trim edges cleanly on cabinets and casework.
Rehau PVC Edgebanding 301799-301 uses PVC, so it runs predictably through standard edgebanders and trimming tools, supporting consistent cutting and scraping behavior during production.
Rehau PVC Edgebanding 301799-301 with CP60581 embossed lacquer suits projects using coordinated decorative surfaces, helping the edge match textured or coated panel faces visually.
Rehau PVC Edgebanding 301799-301 in a 600FT length supports long edgebanding runs, limiting roll changes and keeping machine settings stable across multiple cabinet or fixture parts.
Rehau PVC Edgebanding 301799-301 at 1mm thick provides a solid edge profile that stands up to normal handling of cabinet parts while still trimming efficiently on standard equipment.
Rehau PVC Edgebanding 301799-301 uses the CP60581 code to reference a specific color and texture family, helping shops align edge appearance with coordinated decorative materials.
Rehau PVC Edgebanding 301799-301 combines 15/16 x 1mm dimensions, PVC construction, and a CP60581 embossed lacquer finish to support clean, consistent panel edges. The 600FT length backs longer production runs, so projects using this profile maintain matching edges from start to finish.
Sold In: 1 Roll