
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rehau PVC edgebanding 301799-312 is a PVC edge banding that finishes exposed board edges so panels present a clean, professional line on cabinets, fixtures, and casework. The 15/16 inch width covers standard panel thickness with a slight overhang, giving room to trim back to a crisp edge without exposing the core. The 1mm thickness provides a substantial PVC layer that stands up to everyday contact along doors, drawer fronts, and shelving edges. The CP41534 designation identifies this specific match within the Rehau range, helping keep finishes consistent across jobs when the same code is used. The edgebanding is supplied in a 600 foot length, so a single coil supports longer production runs or multiple smaller projects with fewer changeovers during fabrication.
This Rehau PVC edge banding is manufactured at 15/16 inch wide, giving adequate coverage across most engineered wood or composite panels typically edged in cabinetry and woodworking. The added width beyond nominal panel thickness lets installers trim both faces flush after bonding, which helps keep seam lines tight and uniform. At 1mm thick, the edgebanding offers a defined edge without being overly heavy, which works well for everyday residential or commercial casework. The material is supplied in a continuous 600 foot length, supporting longer machine runs and allowing cut-to-length processing for individual parts. The combination of width, thickness, and roll length aligns with common edgebanding machines and shop processes used for straight edges on cabinet boxes, shelves, and fronts.
This Rehau PVC edgebanding sits in the edge banding product class, so it is intended for covering raw edges of boards used in cabinetry, fixtures, and other woodworking projects. The 15/16 inch format matches well with panel-based construction, where sheet goods are cut to size and edges are then closed with banding. In practice, this size is suited to straight edges on cabinet sides, bottoms, tops, shelves, and similar parts that run through an edgebanding machine. The CP41534 EMB LAC identification links this banding to a defined Rehau finish reference, which matters when coordinating visible edges across multiple components in a run that call for that same finish code on every panel.
The 1mm PVC thickness gives a clear, measurable edge layer, which helps operators set trimming and scraping stations so finished parts have uniform profiles. Because this is PVC edge banding from Rehau, it fits into standard PVC-focused processing parameters, supporting predictable feed, heating, and trimming behavior on typical edgebanders. The 600 foot coil length means the same batch can cover many parts, which helps keep color and appearance consistent across a project when that matters to the final look. Working with this width also provides a small margin for alignment on the machine, so slight setup variations still allow the banding to be trimmed back cleanly without exposing the board core along the front face or back side of the panel.
Rehau PVC edgebanding 301799-312 is 15/16 inch wide, which covers typical panel edges with a small overhang so edges can be trimmed back to a clean, flush line.
This Rehau PVC edge banding is 1mm thick, providing a substantial edge layer that supports defined profiles when trimming and scraping on an edgebanding machine.
The CP41534 EMB LAC reference identifies a specific Rehau finish code, which helps align this PVC edgebanding with panels or components specified to the same designation.
Rehau PVC edgebanding 301799-312 is supplied in a 600 foot length, supporting extended production runs and multiple cabinet or fixture parts from a single coil.
Rehau 301799-312 is a PVC edge banding in the edgebanding product class, intended to cover and finish exposed edges of boards in woodworking projects.
The 1mm thickness creates a noticeable yet manageable edge profile, supporting a solid-feeling edge while still processing efficiently on standard edgebanding equipment.
Rehau PVC edgebanding 301799-312 combines a 15/16 inch width, 1mm thickness, and 600 foot length to support continuous edging of cabinet and casework parts. When this CP41534 EMB LAC designation matches your specified finish, it aligns exposed edges with the rest of the project. For production runs using PVC edge banding in this size range, this coil format keeps panels moving through standard shop edgebanders with consistent material from part to part.
Sold In: 1 Roll