Rehau PVC edgebanding is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cut board edges are covered and visually consistent. The 15/16 inch width spans standard panel thicknesses, which helps conceal substrate edges on common cabinet and casework materials. The 1mm thickness provides a defined edge profile that stands up to regular handling in typical woodworking environments. The CP60301 embossed lacquer surface delivers a textured, lacquered appearance that supports decorative panel designs where surface pattern and sheen need to carry through to the edge. The 600FT length in a single run allows longer jobs to be handled from one continuous supply, which reduces roll changes during production runs. The product is classified by Wurth Baer Supply as edge banding within their edgebanding category, aligning it with cabinet, furniture, and general woodworking applications that rely on PVC edges for consistent finishes.
The 15/16 inch width on this Rehau PVC edgebanding gives installers extra coverage over standard panel thicknesses, which supports flush trimming on both faces after bonding. The 1mm thickness provides a predictable amount of material for edgebanding equipment to process, aiding in consistent trimming and scraping passes on cabinet and furniture components. As PVC edge banding, it fits workflows that use common woodworking tools set for plastic edging, so existing shop setups designed for PVC can work within established temperature, feed rate, and trimming practices. The CP60301 embossed lacquer surface is engineered as part of the banding itself, so when the strip is applied the decorative effect is present immediately along the entire edge span. The 600FT length supports uninterrupted feeding through edgebanders over many parts, which helps maintain a uniform look across matching doors, drawer fronts, and panels in a project.
This Rehau PVC edgebanding, identified by manufacturer part number 301799-318, is categorized by Wurth Baer Supply as edge banding in their edgebanding group, positioning it for use on exposed edges of cabinets, furniture, and general woodworking assemblies. The 15/16 inch width allows it to cover the edge of typical board thicknesses used in those projects, so the cut substrate is hidden behind the band. The 1mm thickness creates a noticeable yet controlled edge that works well on cabinet doors and drawer fronts where a defined perimeter is desired. As PVC edge banding, it integrates into shop lines that process plastic edging materials, matching common woodworking production methods. The CP60301 embossed lacquer designation reflects a decorative surface treatment on the banding, aligning it with finished-panel applications where the front face and edge share a coordinated visual effect.
The 1mm thickness of this PVC edgebanding gives edgebanders and trimmers enough material to work with, which promotes repeatable trimming results across many parts in a run. The 15/16 inch width provides overhang beyond typical panel faces before trimming, helping produce clean, flush edges along cabinet sides and shelves. The CP60301 embossed lacquer surface is continuous along the strip, so the decorative pattern and sheen remain consistent from part to part, aiding in visual uniformity across coordinated cabinet fronts. The 600FT length lets production teams draw from one roll for numerous components, which can help maintain color and surface consistency across an entire bank of cabinets or casework units. The Rehau, Inc. branding and specific manufacturer part number 301799-318 allow shops to reference the exact same PVC edge banding again on repeat jobs, supporting reliable reorders and matching future replacement pieces.
The edgebanding uses manufacturer part number 301799-318, which allows precise identification and repeat ordering when matching previous cabinet or furniture projects.
The Rehau PVC edgebanding is 15/16 inch wide, giving coverage across standard panel thicknesses so the edge can be trimmed flush on both faces after application.
The PVC edge banding is 1mm thick, offering enough material for clean trimming and scraping while delivering a defined, durable-feeling edge on cabinet components.
The CP60301 embossed lacquer designation indicates a textured, lacquer-like surface on the PVC edgebanding that supports matching decorative panel designs along the edge.
The Rehau edgebanding is specified at 600FT, providing extended length for multiple cabinet or furniture parts to be processed from a single continuous roll.
The Rehau edge banding is PVC, aligning it with standard plastic edgebanding processes commonly used in woodworking shops and cabinet production lines.
The Rehau PVC edgebanding 301799-318 from Wurth Baer Supply combines a 15/16 inch width, 1mm thickness, and CP60301 embossed lacquer finish to support clean, coordinated cabinet and furniture edges. The 600FT length gives shops a continuous PVC edge banding supply for larger or repeat projects, helping maintain consistency across every finished panel. For work that relies on PVC edge banding in standard woodworking operations, this Rehau option provides defined dimensions and a decorative surface that align well with typical cabinet, casework, and furniture production needs.
Sold In: 1 Roll