Rehau PVC edgebanding 301799-323 15/16x1mm 600FT

Rehau PVC Edgebanding 301799-323 For Clean Edges

Rehau PVC edgebanding 301799-323 is a PVC edge banding designed to finish exposed panel edges, so cabinet and furniture projects present a clean, professional appearance on every run. The edgebanding is identified by manufacturer part number 301799-323, which ties directly to a specific color and texture match within the Rehau, Inc. system for repeatable results across jobs. The edge banding belongs to the Edgebanding product class, connecting it to standard woodworking and cabinetmaking workflows where matching edge details matter for finished work. The SAP description 15/16X1MM CP21104 EMB LAC 600FT describes a 15/16 inch wide, 1 mm thick edge banding, giving panels substantial edge coverage and a solid visual line. The CP21104 EMB LAC designation refers to an embossed lacquer surface, which helps the banding visually coordinate with textured and coated board surfaces on casework and fixtures.

Key Edgebanding Details That Support Workflows

• The 15/16 inch width gives coverage over typical panel thicknesses, so edges are fully wrapped and trimmed flush, which supports a consistent finished profile along cabinet and furniture runs.
• The 1 mm thickness provides a defined edge detail, so routed corners and transitions feel solid in hand, which is useful on doors, drawer fronts, and high-contact surfaces.
• The CP21104 EMB LAC description indicates an embossed lacquer surface, so the banding presents texture and sheen designed to coordinate with embossed lacquered boards on matching installations.
• The 600FT length reference signals that this is a long-run edgebanding option, so larger projects or repeated production runs can draw from one continuous coil for consistent visual results across many parts.
• The Rehau, Inc. branding identifies the edgebanding as part of a recognized system, so shops aligning to Rehau color and texture libraries can repeat the same specification across multiple projects.

Edgebanding Dimensions That Influence Installation

The 15/16X1MM CP21104 EMB LAC 600FT description defines the key sizing that affects installation setup. The 15/16 inch width gives enough overhang on standard panel thicknesses, so edge banders and trimmers can remove slight excess while still covering the full substrate edge. The 1 mm thickness establishes how much material edge trimmers and scrapers remove, which matters for dialing in flush and radius settings on edgebanding equipment. The 600FT length reference means the banding is configured for extended runs, so feed setups on automatic edgebanders or manual rollers can process long sequences of panels without frequent coil changes. The PVC material designation in the Rehau PVC Edgebanding name signals that common PVC edgebanding equipment and glues are relevant in typical woodworking shop environments.

Using This PVC Edge Banding In Woodworking

Where This Rehau PVC Edgebanding Fits Best

This Rehau PVC Edgebanding, identified as 301799-323, fits naturally into cabinet, furniture, and casework construction where exposed panel edges need a coordinated finish. The edge banding is categorized as Edgebanding under Miscellaneous|Edgebanding, connecting it directly to panel-based projects in woodworking shops. The 15/16 inch width works with common panel thicknesses, so fabricators can process cabinet sides, tops, bottoms, and shelves with the same edge size. The 1 mm thickness creates a noticeable yet controlled edge profile, which suits doors and drawer fronts where a defined edge line is desired. The CP21104 EMB LAC surface description aligns this banding with embossed lacquered surfaces, so projects that rely on textured, lacquered panels can carry that same look across their edges.

Why These Edgebanding Details Support Repeatable Results

The specific manufacturer part number 301799-323 anchors this PVC edge banding to Rehau color and texture standards, so repeating an order keeps visual results consistent between initial installation and later additions. The 15/16X1MM sizing reference supports predictable machine setup, because edge banders can be dialed in around the same width and thickness for multiple work orders. The embossed lacquer (EMB LAC) designation signals a texture focus, so matching this edgebanding to compatible board faces helps reduce visible transitions between face and edge. The 600FT length supports production-style workflows, letting shops edge multiple kitchens, office suites, or fixture runs from a single coil. The PVC construction referenced in the Rehau PVC Edgebanding name fits into standard PVC edgebanding processes, so glue, trimming, and finishing steps stay in line with typical shop routines.

Common Questions About Rehau PVC Edgebanding 301799-323

Select Rehau PVC Edgebanding 301799-323 For Matched Work

Choose Rehau PVC Edgebanding 301799-323 when a 15/16X1MM CP21104 EMB LAC 600FT specification fits the panel edges you are finishing. The defined 15/16 inch width and 1 mm thickness support predictable machine setup, while the embossed lacquer designation helps align edges with textured, lacquered boards. The Rehau, Inc. branding and specific part number 301799-323 connect this edgebanding to an established system, supporting consistent results across new installations and follow-up work that must visually match earlier projects.