Rehau PVC edgebanding gives you a PVC edge banding solution from Rehau, Inc. that finishes exposed panel edges, so raw board edges are covered and jobs present a uniform edge appearance across cabinets and casework. The edge banding is identified as product 301799-329, so installers can match this exact item when repeating jobs or aligning with shop lists that specify this part number. The material is classified under Edge Banding, so it is designed to cap panel edges rather than act as structural trim, which keeps its role clear in a cabinet or furniture build. The SAP description 15/16X1MM CP21153 EMB LAC 600FT defines the working dimensions and length, which supports planning for linear footage needs and matching the band to board thickness in production runs.
The SAP description 15/16X1MM CP21153 EMB LAC 600FT defines a 15/16 inch wide, 1mm thick band, so installers can size their edge-banding equipment and trimming steps around that profile for predictable fit along cabinet and furniture edges. The 1mm thickness gives a known edge build, so finishing passes and corner breaking can be planned to leave a consistent feel across doors, drawer fronts, and panels. The 600FT length described in the SAP data means a single roll covers substantial edge distance, so feed changes during banding runs are reduced and production workflows can stay focused on setup consistency instead of frequent material swaps.
The category listing Miscellaneous|Edgebanding and the product class Edge Banding identify this Rehau PVC edgebanding as a fit for edging panel-based woodworking, so it slots naturally into cabinet shops, casework production, and similar board construction. The 15/16 inch width stated in the SAP description suits common panel thickness plus a small overhang, so the material can be applied then trimmed back to a flush, finished edge on cabinet sides, shelves, and doors. The 1mm thickness described in the same SAP line gives enough material at the edge for a defined profile, so routed corners or eased edges maintain a solid band rather than a feather-thin veneer.
The manufacturer part number 301799-329 ties this roll to a specific Rehau specification, so project documents and reorders can call out this exact banding when matching color, finish, or line standards already established in a shop. The CP21153 code in the SAP description uniquely identifies this particular variant within Rehau offerings, so it can be separated from other widths or thicknesses when organizing inventory or programming edge-banding equipment. The 600FT length noted in the SAP data supports running full kitchens, office suites, or repeated production batches from one consistent roll, so edge appearance and band behavior stay the same from the first cabinet to the last in that batch.
The defined 15/16X1MM dimension in the SAP description gives installers a fixed profile to build around, so cutter settings, flush-trim operations, and corner-detail tooling can be standardized and reused across jobs that specify this Rehau PVC edgebanding. The edge banding classification ensures the product is tuned for edge coverage rather than broad surfacing, so adhesive application and press settings can be focused along the narrow panel edge where this material works. The Rehau, Inc. branding associates the roll with a single manufacturer, so machine presets and workflow notes can reference Rehau PVC edgebanding behavior without mixing assumptions from other material types.
The 600FT length described in the SAP data supports long continuous runs on automatic or manual edgebanding setups, so operators can maintain a tuned machine configuration over many parts before changing material. The repeated identifiers WBSC - 1432 - RU301799-329 and 301799-329 give purchasing and shop teams consistent language, so edge material pulled from storage or ordered through Wurth Baer Supply remains aligned with the band specified on the print or cut sheet. Together, these verified details let installers treat this PVC edge banding as a repeatable, known profile in their process rather than a one-off material.
The Rehau PVC edgebanding has a SAP description of 15/16X1MM, so it provides a 15/16 inch wide, 1mm thick profile that suits typical panel edges in cabinet and furniture construction.
The SAP description states 600FT, so one roll supplies 600 feet of edge banding, supporting extended runs or multiple projects from a single part number.
Rehau 301799-329 is classified as Edge Banding in the Miscellaneous|Edgebanding category, so it is specifically intended for finishing and capping panel edges.
This 15/16X1MM CP21153 EMB LAC 600FT edgebanding is branded by Rehau, Inc., so it aligns with Rehau PVC edgebanding products commonly specified in woodworking shops.
The 1mm thickness specified in the SAP description provides a defined edge profile, so trimming and light edge easing retain a solid band along cabinet and furniture components.
The 301799-329 part number uniquely identifies this Rehau PVC edgebanding, so reorders and project documents can reference the same material for consistent edge appearance.
This Rehau PVC edgebanding, identified by SAP description 15/16X1MM CP21153 EMB LAC 600FT and part number 301799-329, provides a 15/16 inch wide, 1mm thick edge band designed for panel edges. For cabinet, furniture, or casework projects that call for a consistent PVC edge profile with substantial roll length, this Edge Banding from Rehau, Inc. lets shops standardize on a known size and specification. Use these verified dimensions and identifiers to align your edgebanding setups and material lists whenever a 15/16 inch, 1mm PVC edge band is required.
Sold In: 1 Roll