Rehau PVC edgebanding 301799-331 15/16 x 1mm

Rehau PVC Edgebanding 301799-331 For Clean Edges

Rehau PVC edgebanding 301799-331 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so a cabinet, fixture, or component has a defined, uniform perimeter. The 15/16 inch width covers standard panel thicknesses while giving a bit of tolerance on each side, which helps installers trim flush without exposing the core. The 1mm thickness provides a solid PVC edge profile that stands up to routine handling on cabinets and woodworking projects. The CP41544 EMB LAC designation identifies the specific design and finish combination, so shops can repeat the same look across multiple jobs. The 600FT length gives production environments enough material for runs of matching parts without frequent changeovers. As an edge banding in the Miscellaneous|Edgebanding category, it fits directly into woodworking workflows where consistent edge coverage and a matched appearance to surrounding surfaces matter.

Key Rehau 301799-331 Edgebanding Job Advantages

• The 15/16 inch width spans the panel edge with overhang, allowing clean trimming along both faces and reducing risk of flashing the substrate on cabinets and casework.
• The 1mm PVC construction builds a defined edge profile, so doors, drawer fronts, and panels feel solid at the perimeter during everyday use.
• The CP41544 EMB LAC designation ties the edgebanding to a specific appearance, which supports repeatable visual results across replacement parts and new production runs.
• The 600FT length supports extended cutting lists from a single roll, which helps shops run jobs efficiently with fewer roll changes on edgebanders.
• The Rehau, Inc. branding identifies the manufacturer of this edge banding, which helps buyers match it with existing Rehau edgebanding already specified in their projects.

Edgebanding Size Details For Panel Edge Fit

This Rehau PVC edge banding uses a 15/16 inch width so the strip spans the face of typical panel thicknesses with room for trimming, which is useful when dialing in edgebander settings for consistent flush edges. The 1mm thickness means the material forms a measurable PVC layer at the edge rather than a film, so machined corners on doors and panels finish with a noticeable, uniform band. As a product in the Edge Banding class, it is intended to be applied along exposed edges of sheet goods, tying together panel faces and edges in a single, continuous line.

Using Rehau PVC Edgebanding 301799-331 In Shops

Where Rehau 301799-331 Edge Banding Is Applied

Rehau PVC edgebanding 301799-331 is an edge banding used on cabinet and woodworking panel edges where a PVC perimeter is desired. The 15/16 inch width suits edging operations on common panel sizes, giving enough material beyond the core for trimming on both sides. As an Edge Banding product from the Miscellaneous|Edgebanding category, it fits into workflows that finish raw edges on casework, shelving, and front-facing components. The CP41544 EMB LAC description identifies a particular finish character, so when fabricators specify this number, they can match the same edge appearance on new pieces to existing ones built with the same code. The 600FT length supports multi-part assemblies where every door, drawer front, and panel needs the same PVC edge material pulled from one continuous roll.

Details That Support Repeatable Edge Results

The 1mm PVC thickness on this Rehau edge banding adds a consistent amount of material at the edge, which helps edgebanders cut, trim, and scrape within a predictable range on every part. Because the width is 15/16 inch, the band overhangs both faces enough that trimming systems can be set to remove a controlled amount, limiting variation from part to part. The CP41544 EMB LAC code makes this particular design repeatable; shops can identify the same Rehau, Inc. product when reordering to keep color and texture continuity across future jobs. The 600FT roll length means a production run can often be completed from the same material lot, which supports uniform appearance along all cabinet or fixture edges finished with this edgebanding.

Common Questions About Rehau 301799-331 Edgebanding

Select Rehau 301799-331 For Consistent Edge Finish

Rehau PVC edgebanding 301799-331 combines a 15/16 inch width, 1mm thickness, and CP41544 EMB LAC finish designation, so cabinet and woodworking shops can specify a precise edge material. The 600FT length supports production runs where consistent panel edges matter. For projects that rely on a repeatable PVC perimeter, this Edge Banding product provides clear, code-based identification that ties directly into established Rehau, Inc. edgebanding selections.