Rehau PVC edgebanding 301799-334 is a PVC edge banding from Rehau, Inc. that covers and protects raw board edges, so cabinet, furniture, or casework projects present a finished edge instead of exposed core material. The 15/16 inch width stated as 15/16X1MM in the description gives coverage for standard panels with a small overhang for trimming, which helps installers flush-trim without exposing the substrate. The 1mm thickness specified in the SAP description provides a defined edge profile that stands up to normal shop handling compared to thinner tape-style edges. The CP21155 reference in the description identifies a specific color and design family, which lets shops repeat the same visual match across different jobs when they reorder this part number. The notes EMB and LAC indicate an embossed, lacquered surface, which gives the edge a textured, coated appearance that can align with many laminated or coated panel faces.
The 15/16 inch width listed as 15/16X1MM gives installers a slight overhang beyond common panel thicknesses, so trimming flush after bonding produces a clean edge without leaving a reveal of the substrate. The 1mm thickness defined in the SAP description provides enough material for a solid-feeling edge while still heating and forming efficiently on typical woodworking edgebanders. The PVC material identified in the product name and web description responds well to standard hot-melt edge bonding setups, supporting smooth feed and consistent bonding across straight runs. The 600FT length called out in the SAP description lets production teams run multiple cabinets or casework components from a single length, which supports consistent color flow and reduces downtime for roll changes during an edging sequence.
This product is listed in the Category Miscellaneous|Edgebanding and Product Class Edge Banding, placing it directly in panel edge finishing for woodworking. The 15/16X1MM dimension suits edging operations on panel-based constructions such as cabinet sides, shelves, and furniture components where installers want a slightly proud edge to trim to final size. Because the material is described as PVC Edgebanding, it is suited to applications where PVC-faced or compatible panels are used and a coordinated edge is needed rather than a raw core. The CP21155 and EMB LAC notes in the SAP description identify a particular textured and lacquered visual, allowing shops to deploy this banding in visible edge locations such as cabinet fronts or shelving where the edge appearance is part of the overall design.
The 15/16X1MM SAP description confirms that the width slightly exceeds many common panel thicknesses, which gives installers workable trimming tolerance and helps avoid undersized edges that might expose the board after machining. The 1mm thickness gives an edge profile substantial enough to read as a defined band around doors or tops, which supports a uniform line from piece to piece in a run of cabinets. The PVC Edgebanding designation points to a material that responds predictably on standard woodworking edgebanders, so feed speed, heat, and pressure settings can be tuned for repeatable edges across long 600FT runs. The CP21155 embossing and lacquer (EMB LAC) information means the surface carries a structured and coated appearance, supporting consistent sheen and texture along the entire edge so adjoining parts look aligned when installed side by side.
Rehau PVC edgebanding 301799-334 is a PVC edge banding from Rehau, Inc. used to cover and finish raw panel edges, giving cabinets and furniture a uniform finished edge line.
The SAP description 15/16X1MM indicates the edgebanding is approximately 15/16 inch wide and 1mm thick, providing overhang for trimming and a solid-feeling finished edge.
The CP21155 EMB LAC designations identify a specific embossed, lacquered design family, so shops can match this edge visually with surfaces sharing the same design reference.
The 600FT length noted in the SAP description lets production teams edge many components from a single length, supporting longer uninterrupted edging runs.
This PVC edgebanding is manufactured by Rehau, Inc., identified by manufacturer part number 301799-334, giving shops a clear reference to the original source.
The product is categorized under Miscellaneous|Edgebanding and Product Class Edge Banding, placing it in panel edge finishing for woodworking and casework projects.
The combination of 15/16 inch width, 1mm thickness, and 600FT length described in the SAP data positions Rehau PVC edgebanding 301799-334 as a practical option for continuous cabinet and furniture edging. The CP21155 EMB LAC designation gives a defined embossed and lacquered appearance, useful when the edge is part of the finished look. With a clear manufacturer part number 301799-334 and classification as PVC Edgebanding in the Edge Banding product class, this part supports repeatable selection whenever the same size and design are needed on future jobs.
Sold In: 1 Roll