Rehau PVC edgebanding 301799-339 15/16 x 1mm 600ft

Rehau PVC Edgebanding 301799-339 For Clean Panel Edges

Rehau PVC edgebanding 301799-339 provides a PVC edge treatment for panels, so raw board edges are covered and protected in cabinet and furniture work. The 15/16 inch width spans typical panel thickness with a bit of overhang, giving room to trim the edge flush for a clean line. The 1mm thickness supplies a substantial edge profile, so edges feel solid and stand out clearly on finished parts. The CP60636 designation identifies the specific décor setup, helping match this banding to the intended surface design in a production run. An embossed lacquer surface builds in texture and sheen into the PVC, so the edge presents a finished appearance that ties into the overall panel look. The 600 foot length supports longer runs, so shops can handle multiple cabinets or larger jobs with one continuous supply that supports consistent setup on edge banding equipment.

Key Rehau PVC Edgebanding Details For Shops

• The 15/16 inch width covers standard panel edges with trim allowance, letting installers run flush trimmers or routers without exposing core material during sizing.
• The 1mm thickness delivers a defined edge, supporting durable-feeling corners on doors, drawer fronts, and casework components across a project.
• The CP60636 décor code identifies this specific visual design, helping align edge appearance with matching surfaces or reference samples in the same program.
• The embossed lacquer finish provides a textured, lacquered surface on the PVC, giving edges a finished, coordinated look once applied to furniture elements.
• The 600 foot roll length supports extended production runs, so single-setup edging work can proceed with fewer material changes on edgebanding machines.

Edgebanding Size And Finish Details For Installation

This Rehau PVC edgebanding, identified as 15/16X1MM CP60636 EMB LAC 600FT, combines size and finish details that matter during setup. The 15/16 inch width matches common panel thickness ranges, so tooling can be dialed in around a familiar starting point on edgebanders and trimmers. At 1mm thick, the banding handles as a robust PVC strip, making feed and trimming behavior predictable on standard woodworking machinery. The embossed lacquer surface is built into the product, so the installer works with a finished face from the roll through to the final pass. With 600 feet on the roll, edge application can continue across multiple cabinets or runs, allowing consistent machine settings from the first piece to the last.

Using This Rehau PVC Edgebanding In Workflows

Where Rehau PVC Edgebanding 301799-339 Fits In Projects

Rehau, Inc. produces this PVC edgebanding as part of an edgebanding program for woodworking applications, so it fits naturally into cabinet, furniture, and interior panel workflows. The edge banding category placement clarifies that its role is to finish exposed board edges, integrating with case construction where panels need a defined perimeter. The 15/16 inch width allows use on many standard sheet-good thicknesses, so shops can run it on cabinet sides, shelves, and doors without changing banding width between related parts. With 1mm thickness, it suits projects that benefit from a more pronounced, substantial edge rather than a very thin strip, aligning with higher-end panel presentations. The CP60636 décor and embossed lacquer finish give the edge a specific look, so it can be chosen to align visually with a coordinated surface style in the same job.

How Size, Décor, And Roll Length Support Consistency

The 15/16X1MM dimension in the SAP description translates into consistent machine setup, because operators can base pressure, trimming, and heat parameters on a known PVC thickness and width. This consistency helps keep trim quality steady across parts, reducing rework driven by variable edge behavior. The CP60636 décor code ties the banding to a defined design, so the same visual edge can be repeated whenever that décor is specified, supporting repeat jobs and service replacements over time. The embossed lacquer surface contributes a ready-to-use finish, so finishing steps can focus on the panels themselves while the edge already carries its final surface treatment from Rehau. The 600 foot roll length directly supports continuous runs on edge banding machines, so jobs can progress with fewer coil changes, supporting steady throughput and uniform appearance on large or repeated orders.

Common Questions About Rehau PVC Edgebanding 301799-339

Select Rehau PVC Edgebanding 301799-339 For Your Next Run

Rehau PVC edgebanding 301799-339 combines a 15/16 inch width, 1mm thickness, CP60636 décor, embossed lacquer surface, and 600 foot length to support professional panel work. Use this specific part number when your project calls for this décor and edge profile from Wurth Baer Supply.