Rehau PVC edgebanding 301799-342 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they present a consistent, protected surface on cabinets and casework. Its 15/16 inch width covers standard panel thickness with a bit of margin, which helps installers align and trim the banding without leaving substrate visible along the face. The 1mm thickness creates a solid edge profile that stands up to normal shop handling while giving enough material for precise trimming and flushing. The CP41549 EMB LAC designation identifies the specific design and lacquered surface, which matters when matching this edge to panels that share the same reference across a project. A 600FT length gives a continuous run suitable for multiple cabinets or longer production jobs, reducing changeovers during edge banding operations.
This Rehau PVC edgebanding uses a 15/16 inch width that gives installers coverage beyond standard panel thickness, which simplifies alignment on automated or manual edgebanders. The 1mm thickness supplies enough PVC for trimming tools to work without tearing, which supports straight, square edges around cabinet parts. With a defined CP41549 EMB LAC finish, the banding presents a consistent surface as it is applied along doors, drawer fronts, and case edges. The 600FT roll format keeps the material in one continuous length, which supports edging longer runs of panels while maintaining the same finish and profile from part to part.
This Rehau PVC edgebanding is an edge banding product from Rehau, Inc. in the edgebanding category, which positions it for use on cabinet, furniture, and general panel-based woodworking projects where PVC edges are specified. The 15/16 inch width matches common panel dimensions, which makes it appropriate for case sides, shelves, and doors that need a finished edge along both long and short runs. Its 1mm thickness creates a defined edge profile around panel corners, which suits applications where a visible, uniform PVC edge is preferred over ultra-thin tape. The CP41549 EMB LAC designation ties this banding to a particular decorative and lacquered look, which fits projects that rely on that exact reference to coordinate door fronts, exposed sides, and shelving. With a 600FT length, the product supports shop environments handling multiple pieces in the same finish, which fits repetitive cabinet lines or matching add-on work.
The 15/16 inch width of this PVC edge banding gives extra coverage past the panel surfaces, which allows trimming tools to remove slight overhang while still fully covering the substrate, helping avoid thin reveal lines along cabinet edges. The 1mm thickness works as a stable profile for routers and scrapers, which reduces the risk of chipping at corners and supports a smooth transition from face to edge. The clearly defined CP41549 EMB LAC finish code means each roll delivers the same decorative and lacquered appearance, which helps maintain consistent color and sheen from cabinet to cabinet on coordinated projects. The 600FT roll length concentrates this finish and profile into a single supply source, which reduces variation that could occur when mixing shorter lengths and helps shops run continuous edge operations without frequent material changes. The Manufacturer Part # 301799-342 keeps all of these traits tied to one reference, which supports accurate specification on drawings and repeat orders for future phases.
Rehau PVC edgebanding 301799-342 has a 15/16 inch width and 1mm thickness, which provides coverage over standard panels and enough material for trimming to a clean, flush edge.
This CP41549 EMB LAC PVC edge banding is supplied in a 600FT length, which supports edging multiple cabinet components in the same finish during extended runs.
The CP41549 EMB LAC description identifies the specific decorative and lacquered finish of this Rehau PVC edgebanding, which keeps the edge appearance aligned with panels using that reference.
The 301799-342 product is a PVC edge banding in the edgebanding category, which is used to finish exposed edges on panels in cabinet and woodworking projects.
The 1mm thickness on this PVC edgebanding offers a solid edge profile that works well with trimming tools, supporting a smooth, durable transition between panel face and edge.
The 15/16 inch width gives extra coverage across typical panel thickness, which allows slight overhang for trimming while keeping the substrate concealed after processing.
The Rehau PVC edgebanding 301799-342 combines a 15/16 inch width, 1mm thickness, and CP41549 EMB LAC finish in a 600FT roll, which suits cabinet and panel projects that require a consistent PVC edge appearance. Using the defined Manufacturer Part # 301799-342 aligns ordering, shop setup, and repeat work around the same edge profile and finish. For projects that call for this specific Rehau PVC edge banding, this product supports continuous edging runs and a uniform look across doors, cases, and shelving.
Sold In: 1 Roll