Rehau PVC edgebanding 301799-343 is a PVC edge banding that covers exposed panel edges so raw board is concealed and the edge reads as a finished surface. The 15/16 inch width gives coverage across standard panel thicknesses with a bit of overhang, which supports flush trimming without exposing the core. The 1mm thickness provides a solid edge profile that stands up to normal cabinet and fixture use while still working well with common edge banding tools. The CP21159 designation identifies a specific decor match within Rehau offerings, which matters when tying this banding into an existing color and texture program. The embossed lacquer surface builds in both texture and coating in one layer, which supports a consistent appearance across cabinets or fixtures that use the same finish family.
The 15/16 inch width on this Rehau PVC edge banding gives the installer enough material to center the tape on the panel and still trim both sides cleanly, which supports straight, chip-free edges after processing. The 1mm thickness works well with typical edgebanders and trimmers that are set up for standard PVC tape, so existing tooling can be used without special adjustment for an ultra-thin or oversized edge. The PVC construction keeps the band flexible enough to follow normal cabinet edges, which supports reliable application along linear runs commonly found in woodworking projects handled by Wurth Baer Supply customers.
This Rehau PVC edgebanding, identified by manufacturer part 301799-343, is part of the edge banding class, so it is intended for finishing exposed edges on boards used in cabinetry and related woodworking. The 15/16 inch width fits panels where a small overhang is needed for trimming, which works well on common casework and door constructions. The 1mm thickness is suited to installations where a defined PVC edge is preferred, giving the panel a clear transition from face to edge. The CP21159 decor reference aligns this band with a specific finish look, which supports use in coordinated cabinet runs where every edge must match the chosen surface program visually.
The combination of 15/16 inch width and 1mm thickness on this Rehau PVC edge banding gives a predictable profile that can be set once on edge equipment, which reduces the need for repeated fine-tuning across a project. The embossed lacquer surface is applied as part of the band, so every cut from the roll carries the same texture and sheen, which helps large jobs maintain uniform appearance from cabinet to cabinet. The 600 foot indication in the SAP description means long continuous runs are possible from a single roll, which lets shops run extended edge sequences with fewer stoppages. Using a defined decor code like CP21159 allows project planners to call out this exact edge in drawings or cut lists, which supports consistent reordering and matching across phases of a job.
Rehau PVC edgebanding 301799-343 is listed as 15/16 inch by 1mm, which provides slight overhang for trimming and a defined 1mm edge profile on finished panels.
The CP21159 reference identifies a specific decor for this Rehau PVC edgebanding, which helps keep visual matching consistent with other materials using the same code.
The embossed lacquer surface on this Rehau PVC edge banding provides built-in texture and coating, giving edges a uniform sheen and feel across all banded parts.
The 1mm thickness on this Rehau PVC edgebanding creates a noticeable, solid edge while still working smoothly with standard edgebanders and trimming tools used in woodworking.
The 600 foot notation in the SAP description indicates a long roll length, which supports extended cabinet or fixture runs with fewer roll changes during production.
This Rehau PVC edgebanding 301799-343 is classified as edge banding in the edgebanding category, aligning it with typical edge finishing tasks in cabinetry and woodworking.
Rehau PVC edgebanding 301799-343 combines 15/16 inch width, 1mm thickness, and an embossed lacquer CP21159 decor into a single edge solution, which supports consistent appearance across cabinets. For woodworking projects using Wurth Baer Supply materials, this edge banding matches panel edges to a defined finish program so runs look coordinated from end to end.
Sold In: 1 Roll