Rehau PVC edgebanding gives cabinet and furniture edges a finished look by covering exposed substrate, which helps projects present as complete, professional work. This edge banding is identified as 301799-345, so installers can match it precisely to drawings or prior jobs using that part number. The material is PVC, which provides a uniform edge surface that stays consistent along the length, supporting even trimming and routing. The edgeband width is 15/16 inch, giving full coverage over standard 3/4 inch panels with a bit of overhang for flush trimming, which simplifies setup and reduces alignment fuss at the machine. The thickness is 1mm, adding a substantial edge profile that stands up well to normal shop handling and everyday cabinet use. The product is supplied as a 600ft run, allowing long, continuous applications on production jobs without frequent coil changes.
This Rehau PVC edgebanding is described as 15/16X1MM, which signals a width of 15/16 inch and a thickness of 1mm, so it suits typical panel-edge banding in cabinet and furniture work. The width gives coverage beyond the panel face, backing up flush-trim tools with a small margin that accommodates minor fence or feed variation. The 1mm thickness offers more material at the edge than very thin tape, which supports cleaner profiling at corners and improved feel at door and drawer fronts. With a continuous 600ft length, the roll works well where many similar parts must be edged, helping keep feed, trim, and buff operations moving without frequent material changes.
The product is classified as edge banding in the edgebanding category, so it is intended for finishing exposed panel edges in woodworking and cabinet-related work. The 15/16 inch width aligns well with edging needs on 3/4 inch panels used in casework, shelving, and fronts, so shops can standardize setups for many parts with this one size. The 1mm thickness suits applications where a more robust edge is preferred over ultra-thin tape, such as cabinet doors, drawer fronts, and frequently handled panels. Because the material is PVC, it integrates readily into common edgebanding workflows that involve trimming and light profiling, allowing operators to run this product alongside other PVC edges using familiar equipment settings.
The manufacturer part number 301799-345 gives a fixed reference for specifying the same edgeband on drawings, purchase lists, and repeat jobs, which helps shops reproduce an established look when replacing or adding cabinets. The CP60205 EMB LAC description further narrows the identification, tying this roll to a particular series in the Rehau line so that finish matching stays consistent from order to order. The combination of 15/16 inch width and 1mm thickness creates a predictable trimming and scraping profile, which reduces rework because operators can dial in settings once and run large batches with similar results. The 600ft roll length directly supports production efficiency on edgebanding stations, as long runs reduce stops for material changes and help maintain steady throughput on cabinet components and furniture panels.
Rehau PVC edgebanding covers exposed panel edges, which creates a finished appearance and protects the substrate edge along cabinet and furniture components.
The 15/16 inch width extends past typical 3/4 inch panel faces, which provides overhang for flush trimming and helps avoid exposing the core at minor alignment shifts.
The 1mm thick PVC creates a more substantial edge, which supports cleaner profiling and a solid feel on frequently handled doors, drawer fronts, and cabinet edges.
Rehau part number 301799-345 uniquely identifies this specific PVC edgebanding, which helps shops reorder the same material for consistent appearance across projects.
The 600ft length allows long, continuous edging runs, which reduces material change interruptions and helps maintain steady throughput on cabinet or furniture batches.
The CP60205 EMB LAC wording is part of the product description, which ties this roll to a defined Rehau edgebanding series for consistent specification and repeat use.
This Rehau PVC edgebanding, identified as 301799-345 and described as 15/16X1MM CP60205 EMB LAC 600FT, offers dimensions and length that work well in cabinet and woodworking production. By using this specific part, shops align material choice with known sizing, finish reference, and roll length, supporting repeatable edging quality across panels and projects. Add this Rehau PVC edgebanding to the next run when a 15/16 inch by 1mm edge with a 600ft supply matches job requirements.
Sold In: 1 Roll