Rehau PVC edgebanding 301799-356 provides a PVC edge banding solution that covers exposed panel edges so finished components present a continuous surface instead of visible core material. The 15/16 inch width gives coverage over common 3/4 inch panels with room for trimming, which helps installers flush the edge without leaving a reveal. The 1mm thickness provides a solid PVC edge that stands up to normal shop handling while still working smoothly through standard edgebanders. This edgebanding uses the CP21177 designation, which identifies a specific visual style that helps shops keep projects consistent from part to part. The EMB LAC reference in the description distinguishes this product from other Rehau PVC options, so repeat orders match previous work. Supplied in a 600 foot length, this roll supports longer runs and nested jobs without frequent changeover on the edgebander, helping production move steadily.
This Rehau PVC edgebanding 301799-356 uses a 15/16 inch by 1mm format, which fits well into workflows built around 3/4 inch casework panels. The extra width over the panel thickness leaves material on both sides for trimming heads, so operators can tune knives to deliver a smooth transition between face and edge. With 1mm thickness, the band delivers a defined profile at the edge rather than a paper-thin strip, which helps finished parts feel solid when handled. The roll length of 600 feet supports extended runs on an edgebander, so a single setup can handle multiple cabinet boxes, doors, or panels before the roll needs to be changed.
This Rehau PVC edgebanding, listed as 15/16 x 1mm CP21177 EMB LAC, fits projects that use panel construction with exposed edges needing a PVC finish. The 15/16 inch width aligns naturally with 3/4 inch engineered panels used in many cabinet and casework builds, giving enough edge coverage for both straight parts and slight overhangs before trimming. The 1mm thickness supports typical residential or commercial cabinet edges where a defined PVC band is preferred over thinner tape styles. With the CP21177 identification tied to this product number, shops can align this edgebanding with specific doors, drawer fronts, or carcass parts that call for the same appearance, helping maintain a consistent look across all visible edges. The 600 foot roll length also suits small to mid-size production runs where multiple components share the same edge finish.
The combination of 15/16 inch width and 1mm thickness in this Rehau PVC edgebanding 301799-356 supports predictable setup on edgebanders, because operators can rely on a stable band profile during trimming and scraping. Having extra width beyond panel thickness means trimming units can be tuned for a light final pass, which helps reduce edge chatter and leaves a clean transition from PVC to face material. The CP21177 designation and EMB LAC description give shops a clear way to tie this exact band to drawings, job folders, and cut lists, so future reorders match the same edge detail used on initial production. Working from a 600 foot roll allows multiple cabinets, partitions, or fronts to be processed under the same settings before roll change, which supports repeatability across a run. For woodworking teams standardizing materials, the manufacturer part number 301799-356 offers a fixed reference point that connects purchasing, inventory, and shop floor use to the same PVC edgebanding.
The Rehau PVC edgebanding 301799-356 is described as 15/16 x 1mm, giving coverage over typical 3/4 inch panels with extra material for trimming while maintaining a 1mm thick finished edge.
The 1mm thickness on this Rehau PVC edgebanding creates a substantial band, giving cabinet and panel edges a solid feel and a clearly defined profile after trimming operations.
The CP21177 EMB LAC description identifies the specific Rehau edgebanding variant, so shops can match the same visual style and product type when repeating or extending past projects.
The Rehau PVC edgebanding 301799-356 is specified at 600 feet in length, supporting longer production runs and multiple cabinet or panel jobs from a single roll.
The 15/16 inch width gives coverage beyond the 3/4 inch panel thickness, leaving overhang for trimming so finished edges sit flush without exposing the panel core.
The manufacturer part number 301799-356 uniquely identifies this Rehau PVC edgebanding, helping purchasing and production teams reference the same edge material consistently.
Rehau PVC edgebanding 301799-356 combines a 15/16 inch width, 1mm thickness, CP21177 designation, and 600 foot roll length to support organized cabinet and panel production. When a project calls for this specific Rehau PVC edge detail, using the 301799-356 identification keeps job planning, ordering, and shop use aligned around the same material. For shops standardizing panel edges on a repeatable PVC band, this product offers a defined size and description that tie directly into woodworking workflows.
Sold In: 1 Roll