Rehau PVC edgebanding 301799-359, 15/16 x 1mm

Rehau PVC Edgebanding 301799-359 For Clean Edges

Rehau PVC edgebanding 301799-359 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinet and furniture projects present a finished, professional look instead of exposed core material. The 15/16 inch width gives coverage across common 3/4 inch panels with room for trimming on both sides, supporting clean alignment on automated or handheld edgebanders. The 1mm thickness provides a solid edge profile that stands up better at corners compared with very thin tape, which helps reduce chipping during normal shop handling. The PVC construction creates a uniform, machinable edge, so cutting, trimming, and flushing steps stay consistent across a run of parts. As an edgebanding product in the Wurth Baer Supply assortment, it fits into typical woodworking workflows where a matching, durable edge is required on cabinet boxes, shelves, and similar casework components.

Key Details That Support Daily Shop Work

• The Rehau, Inc. brand on this PVC edgebanding provides a defined manufacturer source, which supports shops that want consistent performance across multiple jobs and reorders of the same edge material.
• The 15/16 inch width on this edge banding gives coverage beyond standard 3/4 inch panels, letting installers trim back to a flush, clean edge without exposing the substrate after machining.
• The 1mm thickness in the SAP description defines a medium build at the edge, which helps create a substantial feel on doors, drawer fronts, and case parts while still running smoothly through common edgebanding equipment.
• The SAP description reference to CP41569 EMB LAC identifies a specific finish code, so shops can align this edgebanding with designated board or laminate programs where matching that coded finish is important.
• The 600FT notation in the SAP description indicates a long run length, which supports higher volume cabinet or fixture production without frequent material changeovers during edging operations.

Edgebanding Dimensions That Support Installation

The 15/16 inch width on this Rehau PVC edgebanding gives extra coverage over standard panel thicknesses, so the band can be centered and then trimmed flush without risking exposed edges. The 1mm thickness stated in the SAP description provides a balance between ease of bending around gentle curves and a sturdy edge feel on straight cabinet parts. As an edge banding product within the Wurth Baer Supply range, it is suited to typical cabinet and woodworking edgebander setups that process PVC materials of similar dimensions on production lines or in smaller shops.

Using This Edge Banding In Woodworking Projects

Where Rehau 301799-359 Edgebanding Fits Best

This Rehau PVC edgebanding, identified as Manufacturer Part 301799-359, is designed as edge banding for woodworking applications where raw panel edges need to be covered. The 15/16 inch width referenced in the SAP description works well on casework built from 3/4 inch sheet goods, because it leaves enough material to trim both face and back edges cleanly. The 1mm thickness gives the edge a noticeable profile on cabinet components, supporting a solid-feeling edge on shelving, cabinet sides, and similar parts using compatible finishes. As part of Wurth Baer Supply Companys edgebanding category, it aligns with cabinet shops and millwork operations that already use PVC edge banding as a standard finishing step on melamine or other panel-based constructions.

Why These Dimensions Aid Repeatable Edge Results

The combination of 15/16 inch width and 1mm thickness on this Rehau PVC edge banding helps installers and production teams get predictable results from their edgebanders. The extra width beyond typical panel thickness lets operators position the band without tight tolerances at the feed, then rely on trimming stations to create a precise final edge without substrate breakthrough. The 1mm PVC profile runs consistently through common trimming and scraping tools, supporting smooth, repeatable passes across multiple cabinet parts in a batch. The manufacturer-specific part number 301799-359 and CP41569 EMB LAC reference in the SAP description define a consistent color and texture series, which matters when multiple cabinets or fixtures need visually uniform edges from job to job.

Common Questions About Rehau PVC Edgebanding 301799-359

Select Rehau 301799-359 For Defined Edge Dimensions

This Rehau PVC edgebanding 301799-359 from Wurth Baer Supply offers defined dimensions of 15/16 inch width and 1mm thickness, along with a 600FT length and a specific CP41569 EMB LAC finish code. Those details support planning cabinet or furniture runs where edge profile, color series, and material source need to stay consistent across multiple parts. For shops building casework from 3/4 inch panels and using PVC edge banding in daily production, this product aligns with standard edgebander setups and repeatable trimming workflows.