Rehau PVC Edgebanding 301799-363 For Clean Edges

Rehau PVC edgebanding 301799-363 is a PVC edge banding designed to finish exposed panel edges so they look clean and protected on woodworking projects. The 15/16 inch width covers typical panel thickness while giving a small margin, which helps hide minor cutting variation along cabinet or furniture edges. The 1mm thickness provides a solid edge profile, supporting a more substantial feel at the edge compared with very thin tapes. The CP20849 embossed lacquer surface gives the banding a textured lacquered finish, so edges visually match a coordinating surface design in the project. This Rehau, Inc. edge banding is supplied in a 600ft length, letting shops run multiple cabinets or casework jobs from a single roll, which reduces changeovers during production. The PVC construction creates a uniform material along the entire length, supporting consistent trimming and flushing during edge processing.

Key Rehau PVC Edgebanding Details For Shops

• The 15/16 inch width covers standard panel thickness with overhang, giving room for trimming so installers can flush edges without exposing the substrate.
• The 1mm thickness creates a defined edge profile, supporting clean trimming and scraping passes on edgebanding equipment or manual finishing setups.
• The CP20849 embossed lacquer finish delivers a textured lacquered surface, helping the edge visually coordinate with matching decorative materials in the assembly.
• The 600ft roll length supports longer production runs, allowing shops to edge multiple components from one roll and maintain consistent appearance across projects.
• The Rehau, Inc. branding identifies it as part of the Rehau edgebanding system, helping shops align this edging with other Rehau materials used in their work.

Edgebanding Size And Finish For Practical Installation

This Rehau PVC edge banding uses a 15/16 inch width and 1mm thickness, giving installers enough material to align, bond, and trim edges on casework components. The CP20849 embossed lacquer surface is engineered as a finished decorative face, so once the banding is applied and trimmed, the edge presents a consistent lacquered texture. The PVC material runs the full 600ft length, supporting use with automatic edgebanders or manual application methods where a continuous supply is useful. Because the banding is part of the Rehau, Inc. edge banding line, shops can match this specification wherever 301799-363 is called out on drawings or cut lists.

Using Rehau 301799-363 Edgebanding In Woodworking

Where This Rehau PVC Edgebanding Fits Best

The 15/16 inch width of this Rehau PVC edgebanding suits projects using panels where an edge wider than the panel thickness is preferred, such as cabinets, casework, or furniture components that need trimming back for a flush finish. The 1mm thickness gives enough material for edge shaping and light profiling during finishing, so edges can be dressed without cutting through the PVC. The CP20849 embossed lacquer surface supports use wherever a lacquered, textured decorative look is specified, helping edges visually align with coordinating surfaces in kitchens, offices, or commercial interiors. With a 600ft roll length, this edgebanding serves small runs and extended production jobs, letting fabricators keep appearance consistent when multiple cabinets or fixtures share the same edge specification.

Why These Edgebanding Details Support Consistent Results

The 15/16 inch by 1mm sizing of the 301799-363 edge banding provides a workable margin for trimming, which helps reduce the chance of exposing raw panel material along edges after machining. The 1mm thickness also supports stable feeding through edgebanders, giving equipment a more substantial edge to grab for gluing, pressing, and trimming operations. The CP20849 embossed lacquer finish maintains the same surface character along the full 600ft length, so each door, drawer front, or panel edge finished from the roll presents the same texture and sheen. Because this product is defined by the specific Rehau part number 301799-363, shops can repeat orders to match prior work, allowing repairs, additions, or phased projects to maintain identical edge appearance over time.

Common Questions About Rehau 301799-363 Edgebanding

Select Rehau PVC Edgebanding 301799-363 For Matched Edges

This Rehau PVC edgebanding 301799-363 combines a 15/16 inch by 1mm profile, CP20849 embossed lacquer finish, and 600ft length to support efficient edging on cabinets and casework. When drawings or prior work call out 301799-363, using this specific edge banding keeps edge appearance, texture, and sizing consistent across the entire project.