Rehau PVC edgebanding 301799-364 is a PVC edge banding from Rehau, Inc. that covers and finishes raw panel edges, so cabinet and furniture projects gain a uniform, work-ready edge. The 15/16 inch width gives coverage for typical 3/4 inch panels with overhang for trimming, which helps installers flush-cut without exposing the core. The 1mm thickness adds a defined edge profile compared to thinner tape, supporting a solid-feeling edge on doors, drawer fronts, and casework. The CP40959 embossed lacquer finish provides a textured, lacquered surface that visually matches embossed laminate patterns, helping runs of doors and panels look consistent. The 600 ft length in the SAP description supports longer production runs, so shops can band multiple jobs from one coil and reduce mid-job changeovers.
This Rehau PVC edge banding uses a 15/16 inch by 1mm profile, giving enough width to center and trim on standard casework and door parts while keeping handling manageable at the edgebander. The 1mm gauge works with common edgebanding machines and trimming tools, supporting predictable cutting and scraping without excessive passes. The CP40959 embossed lacquer finish provides a textured lacquered face, which responds well to standard post-machining steps like scraping and light sanding of glue lines. With 600 ft specified, shops can stage the roll on an edgebander and run extended sequences of cabinet parts, reducing interruptions and helping maintain consistent feed settings from the first panel to the last.
As an edge banding in the Edgebanding product class, Rehau 301799-364 is suited to finishing exposed edges on cabinet boxes, doors, drawer fronts, and other flat panel components in woodworking. The 15/16 inch width aligns with work on panels in the cabinet and furniture range, providing extra coverage beyond the panel face so edges can be trimmed tight for a clean visual line. The 1mm thickness gives a balance between a robust edge and efficient machining, which suits both production shops and serious DIY builders using compatible edge banding equipment. With an embossed lacquer CP40959 surface, this banding supports projects that use matching embossed and lacquered decorative surfaces, helping face and edge read as a coordinated system across an installation.
The combination of 15/16 inch width and 1mm thickness in this Rehau PVC edgebanding helps produce repeatable edge quality, because the extra width provides trimming tolerance while the fixed gauge behaves consistently under cutting tools. This supports running multiple panel sizes using a single setup while keeping the edge profile uniform from piece to piece. The CP40959 embossed lacquer designation points to a textured, lacquer-like finish on the banding surface, which matters when aligning edge appearance with laminated or coated faces in the same finish family. By matching an embossed lacquer surface on both face and edge, installations avoid visual breaks along door and drawer perimeters. The 600 ft length referenced in the SAP description supports extended sequences on an edgebander, helping maintain consistent temperature, feed speed, and glue line quality across a whole kitchen or bank of casework without swapping coils mid-run.
Rehau PVC edgebanding 301799-364 is specified at 15/16 inch by 1mm, so it covers typical 3/4 inch panels with trimming room and provides a consistent 1mm edge profile for machining.
The CP40959 embossed lacquer designation identifies an embossed, lacquer-style surface on the PVC banding, so the edge visually aligns with embossed lacquer decorative surfaces on adjacent panels.
The 1mm thickness on this Rehau PVC edge banding provides a noticeable yet manageable edge, supporting clean trimming and scraping while giving components a solid-feeling edge line.
The 15/16 inch width gives extra coverage over standard panel thickness, so installers have margin for alignment and trimming while keeping the substrate fully concealed at the finished edge.
The 600 ft length noted in the SAP description supports longer production runs on an edgebander, so shops can process many parts before changing the roll.
Rehau PVC edgebanding 301799-364, listed as Edgebanding, is used to finish exposed edges on cabinet and furniture panels so raw cores are covered and visually matched to the face.
Rehau PVC edgebanding 301799-364 combines a 15/16 inch by 1mm format with a CP40959 embossed lacquer surface, so cabinet and furniture edges can match embossed lacquer faces. The 600 ft length supports efficient production runs where a single coil services many components. For projects built around embossed lacquer decorative surfaces, this edge banding provides the matching edge treatment that keeps doors, drawers, and casework reading as one coordinated system from Wurth Baer Supply.
Sold In: 1 Roll