Rehau PVC edgebanding 301799-366 is a Rehau, Inc. edge banding designed to finish exposed panel edges with a consistent PVC surface, giving cabinets and furniture a defined transition line along every edge. The 15/16 inch width covers standard panel thicknesses while providing slight overhang for trimming, which supports tight, straight final edges after machining. The 1mm thickness creates a solid edging layer that stands up to routine handling in cabinet and casework applications. The CP60432 designation identifies the specific decor and texture family, helping shops match this roll to projects using the same code. The embossed lacquered surface noted in the SAP description as EMB LAC adds a textured, lacquer-like finish that provides a uniform appearance along the run, so long edges read as one continuous face. A 600 foot length roll supports longer production runs without frequent changeovers, which keeps edge-banding workflow efficient.
This Rehau PVC edge banding uses a 15/16 inch width that gives installers enough material to align on the panel and still have trimming allowance, which simplifies setup on edgebanders and handheld trimmers. The 1mm thickness runs well in standard 1mm-capable edgebanding machines, minimizing adjustment when switching from similar stock. The embossed lacquered (EMB LAC) surface presents a consistent working face for trimming and scraping, so finishing passes can bring the edge down flush without visual changes along the length. The CP60432 decor code gives shops a clear reference when organizing rolls, helping separate this finish from other PVC bandings on the rack.
This Rehau PVC edgebanding sits in the Miscellaneous | Edgebanding category and is intended as edge banding for panels where PVC is specified, such as cabinet components, shelving, and general furniture casework. The 15/16 inch width is well suited to edging panels with face thickness near 3/4 inch, with overhang available for trimming away, which supports accurate flush finishing on both faces. With a 1mm profile, this banding provides a visible edge that can align well with modern cabinet and furniture styles using similar thickness materials. The CP60432 decor identification helps maintain color and texture consistency in environments where multiple Rehau finishes may be in use. The embossed lacquered surface offers a defined edge appearance that pairs naturally with decorative faces that also reference this decor code.
The 600 foot roll length supports multiple cabinets or a batch of parts from a single roll, which helps keep color, texture, and gloss consistent across a project because all pieces draw from the same run. By using a 1mm thickness, the edgebanding allows standard edgebanders and trimmers to operate within familiar settings, which supports predictable trimming and scraping passes from job to job. The 15/16 inch width gives operators some tolerance in panel positioning during banding, so slight tracking variation still trims back to a straight, uniform edge. The CP60432 designation gives estimators, programmers, and bench staff a common reference, simplifying job sheets and reducing the chance of mixing finishes. The embossed lacquered surface, described as EMB LAC, delivers the same texture along the roll, so once machines are dialed in, subsequent parts share the same finished look.
Rehau PVC edgebanding 301799-366 is specified as 15/16 inch wide and 1mm thick, giving coverage for typical panel thicknesses with enough material for trimming to a flush edge.
The CP60432 code identifies the specific decor for this Rehau PVC edge banding, helping match texture and appearance when coordinating with other components using the same code.
This Rehau PVC edgebanding uses an embossed lacquered (EMB LAC) surface that provides a textured, lacquer-like finish, creating a uniform visual transition along cabinet and panel edges.
Rehau 301799-366 is defined as 1mm thick PVC edge banding, aligning with equipment and setups configured for processing standard 1mm edgebanding materials.
This 15/16 inch Rehau PVC edge banding fits cabinet, furniture, and panel projects where a PVC finished edge is required close to 3/4 inch panel thickness.
The 600 foot roll of this Rehau PVC edgebanding supports longer or repeated runs, maintaining consistent decor and finish across a series of cabinets or panels.
Rehau PVC edgebanding 301799-366 from Wurth Baer Supply combines a 15/16 inch width, 1mm thickness, CP60432 decor, and embossed lacquered surface to support clean, matched edges across production runs. For projects calling for this specific Rehau decor and size, choosing this 600 foot roll helps align shop setups, maintain visual consistency, and keep edgebanding workflow running with fewer roll changes.
Sold In: 1 Roll