Rehau PVC edgebanding 301799-370 is a PVC edge banding designed to finish exposed panel edges, so cabinet and furniture parts present a clean, protected edge instead of raw board. The 15/16 inch width covers standard panel thickness with a small overhang, giving room to trim flush for a tight visual line. The 1mm thickness adds a solid-feeling edge profile, which helps panels resist everyday knocks along doors, drawer fronts, and shelves. The CP40905 designation identifies the specific color and design family, so matching existing Rehau installations stays straightforward across projects. The embossed lacquer surface adds a textured, coated finish, so the edge looks more like a finished component than a cut substrate. Supplied as a 600ft length, this roll format supports production runs and repeated service work, reducing changeovers between jobs.
This Rehau PVC edge banding in 15/16 inch width gives coverage beyond common substrate thickness, so alignment on automatic or manual edgebanders stays forgiving while still finishing to a tight line. The 1mm thickness works well with standard trimming and scraping setups, which supports smooth transitions from face to edge on cabinet doors and case panels. The CP40905 embossed lacquer surface presents a finished, textured face to the outside, so the installer can focus setup on adhesion and trimming rather than later cosmetic treatment. With 600ft on a roll, shops can run longer without material changes, which keeps machine settings consistent and reduces small adjustments between batch runs.
This Rehau PVC edgebanding, classified in the Edgebanding product class, is suited to closing off exposed edges on cabinet, furniture, and casework panels. The 15/16 inch by 1mm format aligns with common panel dimensions in woodworking, so doors, drawer fronts, and shelves accept the band without unusual setup changes. The CP40905 color and design designation makes this strip appropriate where that specific Rehau finish is already in use or is part of a new layout, supporting consistent appearance across a job. The embossed lacquer surface gives the edge a finished character from the first pass, allowing it to sit alongside laminated or coated faces without further edge treatment. Supplied in a 600ft length, it is oriented toward shop environments that process multiple parts or full projects rather than single-piece touchups.
The defined 15/16 inch width on this Rehau PVC edge banding gives a predictable margin beyond panel thickness, which helps operators dial in trimmers and scrapers for consistent edge reveals. The 1mm thickness offers enough material for clean trimming without tearing, which supports a smooth, straight edge after machining. The CP40905 embossed lacquer finish supplies a pre-textured and coated surface, so the band responds uniformly to trimming and light scraping without exposing a different core appearance. As a PVC-based strip, it behaves consistently along the roll, which supports steady feed and cutting performance on edgebanding equipment. With 600ft on hand, the same part number can run across many components, which keeps finish, sheen, and edge feel the same from cabinet to cabinet on a project.
Rehau PVC edgebanding 301799-370 is specified as 15/16 inch wide by 1mm thick, so it covers typical panel thickness with extra width for trimming to a clean, flush edge.
The CP40905 embossed lacquer description identifies a specific Rehau color and texture with a coated surface, so the finished edge presents a textured, finished appearance matching that design family.
This Rehau PVC edge banding is supplied in a 600ft length, so shops can run multiple cabinets or a full project while keeping the same finish and setup on the edgebander.
Rehau 301799-370 is a PVC edge banding, giving a uniform plastic-based strip that responds predictably during edgebanding, trimming, and scraping steps in cabinet production.
This Rehau PVC edgebanding is part of the Edgebanding product class, used to finish exposed edges on cabinet, furniture, and casework panels for a cleaner, protected appearance.
The 1mm thickness on this Rehau PVC edge banding provides a noticeable but manageable edge, supporting solid-feeling fronts and reliable trimming without excessive material removal.
This Rehau PVC edgebanding 301799-370 combines 15/16 inch width, 1mm thickness, and a CP40905 embossed lacquer finish to deliver a consistent, finished edge on cabinet and furniture panels. The 600ft roll length supports shop workflows that run multiple parts with the same color and texture. For projects built around this Rehau design family, choosing this specific edgebanding part number keeps edge appearance, profile, and texture aligned from piece to piece.
Sold In: 1 Roll