Rehau PVC edgebanding 301799-375 is a PVC edge banding designed to finish exposed edges on panels and components, so cut edges transition to a uniform, work-ready surface. The 15/16 inch width gives coverage over standard panel thicknesses with a margin for a clean trim pass along both faces. The 1mm thickness provides a noticeable edge profile that holds up through handling and trimming operations. The CP41125 designation and embossed lacquer surface create a textured, lacquered look that visually upgrades basic board edges. Supplied in a 600ft length, this continuous run supports longer jobs or repeated setups without frequent material changeover, which supports steady production. Branded by Rehau, Inc., this edgebanding aligns with common professional woodworking workflows where consistent edges, repeatable trimming, and matching appearance across multiple parts matter.
This Rehau PVC edgebanding is specified at 15/16 inch wide and 1mm thick, giving installers a defined margin to apply, then trim back to the panel faces for a flush result. That extra width supports slight panel thickness variation while still yielding a straight finished edge after trimming. The CP41125 embossed lacquer surface brings a textured, lacquer-like finish to the edge, which fits applications where the panel face and edge need a coordinated visual. The 1mm thickness offers enough material for standard trimming or scraping passes without cutting into the substrate, which supports repeatable setups on edgebanders and handheld trimmers across multiple parts.
As a PVC edge banding in the edgebanding category, Rehau 301799-375 suits woodworking situations where exposed board edges need to be covered for a finished look. The 15/16 inch width pairs with typical panel thicknesses used in cabinetry and casework, giving installers enough overhang for trimming while keeping material use efficient. The 1mm thickness balances flexibility for application with enough body to present a defined edge line, useful on cabinet sides, shelves, and other visible components. The CP41125 embossed lacquer surface supports projects that call for a textured, lacquer-style appearance on the edge, aligning the look of edges with adjacent surfaces in woodworking builds. With 600ft available on a single part number, shops can run this same edgebanding across multiple rooms or matching installations without changing product specifications mid-project.
The combination of 15/16 inch width and 1mm thickness in this Rehau PVC edgebanding supports consistent processing on standard edgebanding equipment. The width provides enough tolerance so parts can be slightly misaligned during application yet still trim back to a straight edge, limiting rework. The 1mm gauge runs well through common trimming tools, giving enough material to fine-tune the edge without leaving a thin, fragile strip. The CP41125 embossed lacquer surface also helps edges present as intentional design elements rather than raw panel sides, which matters when repeating the same detail across banks of cabinets or multiple casework pieces. The 600ft length supports longer production sequences, so once machines are dialed in for this specific Rehau, Inc. part number 301799-375, the same setup can carry through many parts for uniform, predictable results.
Rehau PVC edgebanding 301799-375 is 15/16 inch wide and 1mm thick, giving installers extra width to trim back flush and enough thickness to form a defined, workable edge.
The CP41125 embossed lacquer surface gives the PVC edgebanding a textured, lacquer-like finish, so exposed edges visually upgrade from raw board to a coordinated, finished surface.
The 15/16 inch width covers common panel thicknesses with overhang, allowing a clean trim on both faces so cabinet and casework edges finish straight and even.
The 1mm thickness gives Rehau PVC edgebanding enough body for standard routing or scraping while maintaining flexibility, supporting a solid-feeling finished edge in regular handling.
The 600ft length supports extended runs on the same setup, letting shops edge multiple cabinets or projects with one Rehau 301799-375 roll for consistent results.
Rehau, Inc. is the brand behind this PVC edgebanding, placing part 301799-375 within an established edge banding product class used in woodworking environments.
The Rehau PVC edgebanding 301799-375 combines a 15/16 inch width, 1mm thickness, and CP41125 embossed lacquer surface to deliver a defined, textured edge finish across panels. The 600ft length supports multi-part or multi-room work from a single part number. For shops and installers using PVC edge banding in regular woodworking or cabinetry builds, this Rehau, Inc. edge banding offers a repeatable way to turn exposed board edges into coordinated, finished lines that align with established edgebanding workflows.
Sold In: 1 Roll