Rehau PVC edgebanding 301799-377 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they present a clean, uniform surface on cabinets and casework. The 15/16 inch width covers standard panel thickness with slight overhang, giving room to trim flush without risking a visible substrate line. The 1mm thickness provides a solid edge profile that stands up to normal handling while keeping routing and trimming straightforward on edgebanders or handheld tools. The CP21015 designation identifies the specific color or decor match, letting shops align this banding with corresponding laminated or coated panels for consistent appearance across doors, drawer fronts, and carcass parts. The EMB LAC notation indicates an embossed lacquer surface, so the edge carries a defined texture and sheen that coordinates with textured or finished faces, helping projects look planned rather than pieced together.
This Rehau PVC edgebanding uses a 15/16 inch width, giving installers enough coverage on standard panel edges so trimming operations can dial in a precise flush edge without leaving raw substrate exposed. The 1mm thickness works well in automated and manual setups, because it is thick enough to shape a defined radius yet thin enough to process at typical feed speeds without overloading cutting tools. The EMB LAC embossed lacquer finish provides a worked surface that responds predictably to trimming and scraping, supporting a clean transition from face to edge while carrying the intended texture. With CP21015 decor coding and a 600 ft coil length referenced in the SAP description, this banding supports repeatable runs where the same edge detail needs to carry across many cabinet or furniture components.
Rehau PVC edgebanding 301799-377 is positioned as an edge banding in the edgebanding category, so it serves as the finishing element on exposed edges of panel-based construction. The 15/16 inch by 1mm profile works with common board sizes in cabinet, closet, and general casework applications, giving fabricators a single width that spans most verticals and horizontals on a job. The CP21015 decor reference helps align this coil with matching or coordinating panel materials, which matters when doors, drawer fronts, and cabinet interiors all need a consistent color and surface feel. Because the surface is specified as EMB LAC, the embossed lacquer texture can echo the character of textured laminates or coated panels, allowing the edge line to sit visually quiet rather than standing out as a different material. In production environments, the 600 ft length called out in the SAP description supports multi-piece cutting lists, so operators can load a coil and run series of parts without frequent changeovers that interrupt flow.
The combination of 15/16 inch width and 1mm thickness in this Rehau PVC edge banding gives shops a predictable trimming window, which matters when dialing in pressure rollers, guillotines, and flush trimmers on an edgebander. That bit of extra width beyond panel thickness allows light alignment variation while still delivering a clean, even reveal once trimmed. The 1mm gauge provides enough material for consistent radius milling along the edge, so profiles look uniform from part to part rather than thinning out at corners. The EMB LAC embossed lacquer finish contributes a controlled surface that accepts machining and scraping without a sudden change in gloss, which helps the transition between panel face and edge appear deliberate. With CP21015 decor coding and manufacturer part number 301799-377, shops can document this exact coil in job notes and reordering systems, supporting repeat specifications on future projects that need the same visual match and processing behavior.
Rehau PVC edgebanding 301799-377 is specified at 15/16 inch width and 1mm thickness, giving enough coverage for standard panel edges while allowing clean trimming and a defined finished profile.
The CP21015 reference on this PVC edge banding identifies a specific decor or color match, helping shops coordinate the edge with corresponding panel finishes across a project.
The EMB LAC notation signals an embossed lacquer surface, so the edge carries a defined texture and sheen that visually aligns with textured or lacquered panels in cabinet and furniture work.
The 1mm thickness on this Rehau PVC edgebanding offers a substantial yet manageable edge, supporting radius milling and trimming while running efficiently on typical edgebanding equipment.
The 600 ft length identified in the SAP description supports longer production runs, allowing operators to process many cabinet or furniture parts before changing coils.
The manufacturer part number 301799-377 uniquely identifies this Rehau PVC edgebanding variant, tying together its size, decor code CP21015, EMB LAC finish, and coil length.
Rehau PVC edgebanding 301799-377 pairs its 15/16 inch by 1mm profile with CP21015 decor and an EMB LAC embossed lacquer surface, giving shops a defined option when finishing exposed panel edges. With its specified 600 ft length and documented manufacturer part number, this coil supports both one-off builds and repeat production work where consistent appearance and processing behavior matter. For projects built around matching decor references, this edge banding provides a clearly identified solution that keeps cabinet and casework edges aligned with the chosen surface design.
Sold In: 1 Roll