Rehau PVC edgebanding 301799-379 is a PVC edge banding solution that covers exposed sheet edges on casework and panels, creating a finished transition where core material would otherwise remain visible. The 15/16 inch width gives coverage past typical 3/4 inch panel thickness, allowing a small trimming margin so the edge can be flushed accurately. The 1mm thickness provides a solid edge profile, giving enough material for standard edge-banding trimming tools without cutting through to the substrate. The CP20956 reference in the description identifies the specific color or pattern family, helping match this banding with corresponding laminated or coated surfaces in the same scheme. The notation EMB LAC describes an embossed lacquer surface, which delivers a textured, lacquered appearance at the edge so the finished edge visually coordinates with similar decorative finishes on the main panel faces.
The 15/16 inch width of this Rehau PVC edgebanding provides extra coverage beyond standard panel thickness, which supports reliable trimming passes along straight or slightly uneven substrates. The 1mm PVC construction gives a balance between flexibility during application and enough body to resist tearing during edge processing. The embossed lacquer-style surface described as EMB LAC creates a defined face on the banding, which guides orientation during installation so the visible side consistently presents the intended texture and sheen. The CP20956 decor reference anchors the visual specification, helping align this banding with matching board programs or design standards across a project or shop.
This Rehau PVC edgebanding, listed as 15/16 x 1mm, is suited to edging panel components where the core edge needs coverage that slightly overhangs before trimming. The 15/16 inch width gives enough overhang around typical casework thicknesses, so both faces can be flushed without exposing the substrate. The 1mm thickness supports use on cabinet sides, shelves, tops, and fronts where a moderate edge profile is desired rather than a very thin tape look. The CP20956 decor code and EMB LAC surface description make this banding appropriate where an embossed lacquer character is part of the design, such as coordinating with lacquer-finished cabinet or furniture panels. As an edge banding product in the edgebanding category, it fits into workflows that finish raw panel edges to match adjacent decorative surfaces on built-ins, commercial fixtures, or residential cabinetry.
The defined 15/16 inch width and 1mm thickness of this Rehau PVC edgebanding help standardize setup for trimming and edge processing across multiple panels. Because the width exceeds the face thickness of most case materials, installers can rely on a repeatable trimming allowance that simplifies alignment of trimming equipment. The EMB LAC description signals an embossed lacquer appearance, which gives the edge a specific visual and tactile target during quality checks, contributing to consistent presentation from part to part. The CP20956 identifier ties the banding to its decor family, so shop drawings and cut lists can reference that code to control which edge is used on a given job. With a 600 ft length specified in the description, the roll supports repeatable runs using the same configuration across many parts, reducing variability between early and late pieces in a project.
Rehau PVC edgebanding 301799-379 is described as 15/16 x 1mm, giving a 15/16 inch width and 1mm thickness for edging typical panel components.
The 15/16 inch width provides coverage beyond standard panel thickness, allowing a trimming margin so the edge can be flushed cleanly to both faces.
The 1mm thickness gives a solid PVC edge that works well with common trimming tools and produces a defined edge profile on doors and panels.
The CP20956 designation identifies the decor family, and EMB LAC describes an embossed lacquer-style surface, aligning edge appearance with matching decorative panels.
The 600 ft length enables longer runs or multiple jobs from a single roll, helping maintain the same decor and setup across many edged parts.
Rehau 301799-379 is a PVC edge banding used to finish and protect exposed panel edges so they match the specified CP20956 embossed lacquer decor.
Rehau PVC edgebanding 301799-379 delivers a 15/16 inch wide, 1mm thick PVC edge in the CP20956 EMB LAC decor, aligning size and appearance for edging work. For projects built around that decor family and an embossed lacquer look, this banding supports consistent, matched edges on finished panels.
Sold In: 1 Roll