Rehau PVC edgebanding 301799-380 gives cabinet and furniture projects a defined edge using a 15/16 x 1mm PVC strip sized for common panel thicknesses, so exposed board edges are covered in one pass for a finished look. The CP41185 designation identifies this specific profile and color series, helping shops repeat the same appearance across multiple runs. Its embossed lacquer surface adds a textured, coated finish on the PVC, so the edge visually upgrades raw core material. Supplied in a 600 ft length, this edgebanding supports longer production runs or multiple jobs from a single roll, which reduces changeovers for installers and shop crews.
This Rehau PVC edge banding in a 15/16 x 1mm format presents a size that works with common edgebanding machines and hand tools, so installers can feed or apply the strip without special handling. The 1mm thickness supports clean trimming and scraping, giving a square-feeling edge once excess is cut back. Its embossed lacquer surface arrives with a defined finish on the face of the band, so after bonding and flush trimming, the only remaining steps relate to standard cleanup rather than additional surface treatment on the edge itself.
This Rehau, Inc. 301799-380 edgebanding sits in the Edge Banding class and is suited to closing off exposed edges on cabinets, furniture, and other panel-based assemblies where PVC is part of the material mix. The 15/16 inch width allows coverage of boards around three-quarters of an inch with extra material to trim flush, so installers can handle slight sheet tolerances while still delivering straight lines on front faces. With 1mm thickness, this banding works well wherever a more pronounced edge is preferred over ultra-thin tapes, such as cabinet sides, shelving fronts, and similar workpieces.
The combination of 15/16 inch width and 1mm thickness gives enough material for typical edgebanders to apply pressure and cut back, which supports uniform reveals on run after run. The PVC construction paired with the CP41185 series specification means the banding keeps the same look from coil to coil, so repairs or additions blend into earlier work using the same part number. The embossed lacquer finish brings a ready-to-use surface to the edge once it is applied and trimmed, saving downstream finishing time at the edge and allowing sanding and finishing efforts to focus on faces and joints instead of the banded line.
Rehau PVC edgebanding 301799-380 is 15/16 inch wide and 1mm thick, giving coverage beyond typical board thickness so installers can trim back to a straight, clean edge.
The embossed lacquer finish on this PVC edgebanding adds texture and a coated surface, so the edge looks finished and coordinates visually with decorative faces on cabinets or panels.
The CP41185 designation identifies the specific profile and color series of this edgebanding, which supports consistent appearance across projects ordered under the same part number.
The 600 ft roll length allows multiple cabinets or longer runs to be edged from one coil, reducing changeovers and supporting continuous passes on edgebanding equipment.
The 1mm thickness gives enough material for clean trimming and scraping, creating a defined edge profile that suits cabinet fronts, shelf edges, and similar panel work.
This Rehau 301799-380 edgebanding uses the CP41185 specification, so reordering the same part number helps match edges on additions or repairs to earlier projects.
The Rehau PVC edgebanding 301799-380 combines a 15/16 x 1mm profile, CP41185 series identification, and an embossed lacquer finish to deliver a repeatable edge treatment. The 600 ft coil fits cabinet and panel shops needing consistent appearance across multiple runs. For projects built around PVC edge construction, this part number supports a defined look from job to job with a band sized for efficient trimming and finishing on standard woodworking equipment.
Sold In: 1 Roll