Rehau PVC Edgebanding 301799-384 For Clean Panel Edges

Rehau PVC edgebanding 301799-384 is a PVC edge banding solution that covers and protects exposed panel edges, so cabinet and furniture projects present a finished look instead of raw substrates. The 15/16 inch width matches common panel thicknesses with a slight overhang, which allows trimming back to a crisp, flush line after application. The 1mm thickness provides a defined edge profile that stands up better than ultra-thin tape-style edging in typical shop environments. The CP40802 LAC designation identifies the specific design and finish variant, so repeat orders match existing installations when the same code is used. A 600 ft length supports longer production runs or multiple jobs from a single roll, which reduces changeovers during fabrication. As an edge banding product from Rehau, Inc., it fits into standard woodworking workflows wherever PVC edging is specified by shop standards or drawings.

Key Rehau PVC Edge Banding Details For Shops

• The 15/16 inch width gives coverage across standard panel thicknesses with extra margin, so trimming operations can dial in a straight, clean edge without risking short coverage on the face.
• The 1mm thickness creates a substantial PVC edging layer, which helps maintain a consistent edge appearance along cabinet sides, doors, or shelving where visibility is high.
• The PVC construction defines this as a thermoplastic edgebanding, so it pairs with common shop equipment set up specifically for PVC edging on casework and furniture components.
• The 600 ft length per roll is suited to production or multi-job use, reducing roll change interruptions on edgebanders when running longer batches of similar parts.
• The CP40802 LAC identifier ties the roll to a specific appearance series, which supports visual continuity when fabricating components that need to match prior work using the same code.
• The Rehau, Inc. branding situates this edging within a recognized edgebanding product class, which helps shops align it with other Rehau PVC edge solutions already in their material libraries.

Edgebanding Size And Format For Installation Workflow

This Rehau PVC edgebanding uses a 15/16 inch width and 1mm thickness, so it is sized for edge banding machines and manual setups that work with PVC bands in that dimension range. The slight width over typical panel thickness gives room for trimming knives or flush-routing operations to produce straight, chip-free edges along cabinet and furniture parts. Its PVC edge banding construction means it fits into workflows designed specifically around PVC thermoplastic edging, from feed setup through trimming. With a 600 ft continuous length noted in the SAP description, the roll format supports continuous running on edgebanders for casework, doors, or shelving that all call out this width and thickness.

Using Rehau 301799-384 Edgebanding In Woodworking

Where This PVC Edgebanding Fits Best

This Rehau PVC edge banding is identified as edgebanding within the miscellaneous edgebanding category, positioning it for use wherever PVC edging is specified on cabinet, furniture, or general woodworking projects. The 15/16 inch width allows it to cover exposed edges on panels built around common nominal thicknesses, so case sides, shelves, or tall panels can receive continuous, uniform edging along their length. At 1mm thick, the band creates a defined edge line that suits visible cabinet runs, tall pantry sides, or office furniture where the edge treatment contributes to the finished appearance. The CP40802 LAC designation ties the product to a specific design variant, which matters when multiple components across a project need to share a consistent edgebanding look. Because it is PVC edgebanding, it aligns with project specifications that call out PVC material instead of other edge materials.

Why These Edgebanding Details Support Consistent Results

The combination of 15/16 inch width and 1mm thickness in this Rehau, Inc. PVC edgebanding provides predictable geometry for setup on edge banding machinery, which supports repeatable trimming, scraping, and finishing operations across many parts. That width helps operators position panels with confidence that the band will cover the core, even when sheet tolerances vary slightly, so final trimming brings everything back to a precise edge alignment. The 1mm thickness gives tooling an established material depth to work with, which helps maintain the same edge radius and profile across cabinet runs when tooling is set once and used on multiple pieces. The 600 ft roll length supplies enough material to run through a series of doors, shelves, or case parts in one session, which helps hold visual consistency because all parts draw from the same edgebanding lot and finish code. The clearly defined manufacturer part number 301799-384 ties all these characteristics together so shops can call out the exact edging needed on drawings and job tickets.

Common Questions About Rehau PVC Edgebanding 301799-384

Select Rehau 301799-384 For Defined PVC Edges

Rehau PVC edgebanding 301799-384 combines a 15/16 inch width, 1mm thickness, and CP40802 LAC design code into one clearly defined PVC edge banding option. Those specifics allow drawings, cut lists, and shop notes to call out an exact edging solution for cabinet, furniture, or general woodworking projects. The 600 ft length supports efficient runs in production or repeat work in smaller shops that standardize on this width and thickness. When a project requires PVC edge banding with these dimensions and the CP40802 LAC variant, selecting Rehau 301799-384 aligns material choices directly with the documented requirements.