Rehau PVC edgebanding identified as FO 756 Natural Maple 15/16X1MMX600' gives cabinet and furniture projects a defined edge treatment in a natural maple tone. This PVC edge banding from Rehau, Inc. provides a matching strip where exposed panel edges need a finished look, supporting a consistent appearance across doors, drawer fronts, and casework. The FO 756 Natural Maple identification ties the banding color and pattern to that specific maple design, helping align edge treatment with the chosen surface. The 15/16 inch width allows coverage of standard panel edges with enough margin for trimming during fabrication. The 1mm thickness delivers a solid edge profile that stands up to normal handling during installation and everyday use. The 600 foot length in the SAP description FO 756 Natural Maple 15/16X1MMX600' supports longer runs and repeated projects using the same edgebanding reference.
The FO 756 Natural Maple 15/16X1MMX600' description specifies a 15/16 inch wide PVC edgebanding, which gives installers room to align the strip to the panel and trim the slight overhang for a clean edge. The 1mm thickness called out in the same description provides a measurable profile that works well with common trimming and flush-routing tools used in edge banding operations. The 600 foot length supports repetitive installation on multiple cabinets or furniture pieces under the same project, maintaining the same FO 756 Natural Maple edge all the way through.
The SAP description FO 756 Natural Maple 15/16X1MMX600' identifies this Rehau PVC edgebanding as a natural maple solution suited for edging cabinet and furniture panels needing that tone. The 15/16 inch width noted in the description offers coverage for standard sheet goods used in casework, allowing the edge band to fully cover the substrate with extra material for final trimming. The 1mm thickness gives the edge a defined feel where hands contact doors and drawer fronts, supporting a solid transition between the face and edge. The extended 600 foot length helps fabricators run entire kitchens, office builds, or series of fixtures with one consistent FO 756 Natural Maple edge reference.
The manufacturer part number 301799-392 ties this FO 756 Natural Maple 15/16X1MMX600' Rehau PVC edgebanding to a specific product, which supports repeatable sourcing when a shop standardizes on this color and size. The 15/16 inch by 1mm sizing gives set dimensions that align with common machine setups, helping operators dial in feed, heat, and trim parameters once and apply them across runs. The PVC material type identified in the product name signals a uniform synthetic edge that responds predictably in edge banding equipment, supporting smooth glue lines and clean trimming. The FO 756 Natural Maple designation provides a consistent aesthetic target, helping installers and fabricators match new work to previous jobs using the same edgebanding part number.
FO 756 Natural Maple in the SAP description ties this Rehau PVC edgebanding to a specific natural maple appearance, which helps keep cabinet and furniture edges aligned with that maple design.
The 15/16 inch width in FO 756 Natural Maple 15/16X1MMX600' provides full coverage over typical panel thicknesses with slight overhang, which allows trimming back to a precise flush edge.
The 1mm thickness referenced in FO 756 Natural Maple 15/16X1MMX600' creates a noticeable edge profile that works well with standard trimming tools and supports a solid-feeling cabinet or furniture edge.
The 600 foot length in the FO 756 Natural Maple 15/16X1MMX600' description gives shops enough Rehau PVC edgebanding for longer runs, which supports consistent edging across multiple pieces.
The manufacturer part number 301799-392 uniquely identifies this FO 756 Natural Maple 15/16X1MMX600' Rehau PVC edgebanding, which helps match previous installations and maintain material consistency.
The product name Rehau PVC edgebanding, 301799-392 confirms this is PVC edge banding, which offers a uniform synthetic edge suitable for cabinet and furniture panel edges.
The FO 756 Natural Maple 15/16X1MMX600' description defines this Rehau PVC edgebanding as a 15/16 inch by 1mm edge solution in a natural maple tone, giving shops a clear standard for cabinet and furniture edges. The specific Rehau manufacturer part number 301799-392 supports straightforward reordering whenever an existing installation or shop finish program uses this FO 756 Natural Maple reference. For projects built around a natural maple look that rely on PVC edge treatment, this Rehau PVC edgebanding offers a defined size, color identifier, and length that align with repeatable shop and field workflows.
Sold In: 1 Roll