Rehau PVC edgebanding 301799-394 15/16 x 1mm

Rehau PVC Edgebanding 301799-394 For Clean Edges

Rehau PVC edgebanding 301799-394 is a PVC edge banding from Rehau, Inc. that covers and protects raw board edges on woodworking projects. The 15/16 inch width gives coverage across standard panel thicknesses with a margin for trimming, which helps installers get a flush, finished edge after machining. The 1mm thickness provides a substantial PVC layer at the edge, giving a solid feel while allowing routine trimming and light profiling without cutting through. The CP20333 designation identifies the specific finish and design within the Rehau line, so shops can match this edgebanding to panels and maintain consistent appearance across runs. The 600FT length groups a large amount of material in a single part number, which supports repeated cabinet or fixture production without frequent material changes during edgebanding operations.

Key Rehau Edge Banding Details For Shop Work

• This Rehau PVC edgebanding is classified as Edge Banding, so it is intended specifically to finish and protect the exposed edges of panels in woodworking and cabinet applications, which keeps projects visually consistent around the perimeter.
• The 15/16 inch width on this PVC edgebanding provides slight overhang for standard panel edges, which allows trimming equipment to cut back to a precise line and helps reduce visible misalignment along cabinet sides and doors.
• The 1mm PVC thickness specified in the SAP description creates a more substantial band at the edge than very thin tape, which gives the edge a sturdier feel and supports light edge detailing while maintaining coverage.
• The CP20333 LAC reference in the description identifies a defined Rehau finish option, which lets fabricators order the same edgebanding design again and keep color and texture consistent across replacement parts or additional cabinets.
• The 600FT length noted in the SAP description means the part is suited to longer production runs, which reduces changeovers on edgebanders and can help maintain line efficiency on multi-cabinet or fixture jobs.

Edgebanding Size And Details For Installation Fit

This Rehau PVC edgebanding uses a 15/16 inch width, giving edge coverage beyond common panel thickness so trimmers can remove overhang and leave a clean line. The 1mm PVC thickness provides enough material for machining adjustments at the edge, which helps when dialing in trimming or scraping equipment for precise flush results. Being defined as Edge Banding in the product data, it is intended to be applied along panel edges in a continuous run, aligning with typical edgebander feed setups. The CP20333 designation ties this roll to a specific Rehau finish, so it can be matched with the same design already used on existing panels or previous jobs.

Using Rehau 301799-394 Edgebanding In Workflows

Where This PVC Edge Banding Fits Best

This product is identified as Rehau PVC edgebanding within the Edgebanding category, so it fits into woodworking and cabinet workflows where PVC edge banding is preferred. The 15/16 inch width makes it suitable for covering the edges of panels used in cabinetry, fixtures, and similar constructions, giving fabricators enough material to center the band and still have trim allowance. The 1mm thickness supports use on cabinet doors, case sides, and shelving where a more substantial band is desired at the edge. With a 600FT length per roll, the edgebanding aligns well with shop environments that run series of cabinets or components, helping them work through multiple parts without changing material mid-run. The CP20333 LAC reference allows shops already using this Rehau design to align new workpieces visually with earlier projects that used the same finish code.

Why These Rehau Details Support Consistent Results

The 15/16X1MM CP20333 LAC 600FT designation in the SAP description combines width, thickness, finish code, and length in one part number, which lets purchasing and production reference a single identifier when repeating jobs. The 15/16 inch width and 1mm thickness give predictable edge geometry, which supports consistent trimming setups from piece to piece on edgebanders and manual trimmers. Because this edgebanding is PVC from Rehau, Inc., it fits into workflows already standardized around Rehau PVC materials, helping maintain uniform machining behavior and appearance across components. The 600FT roll length supports planning for multiple cabinets or fixture runs from one roll, which can streamline job staging and reduce interruptions on the edgebanding line. The manufacturer part number 301799-394 provides a stable reference for reordering the same PVC edge banding when matching existing installations or expanding a project later.

Common Questions About Rehau PVC Edgebanding 301799-394

Select Rehau 301799-394 For Matching Edge Work

Rehau PVC edgebanding 301799-394 from Wurth Baer Supply combines a 15/16 inch width, 1mm thickness, and CP20333 finish code in a 600FT roll, giving shops a defined PVC edge banding they can specify, repeat, and align with their cabinet or woodworking projects.