Rehau PVC edgebanding 301799-397 provides a PVC edge banding solution from Rehau, Inc. that covers and finishes exposed panel edges on woodworking projects. The 15/16 inch width works with panels where the face material and substrate together fall within that coverage, so the edge is fully covered in one pass. The 1mm thickness gives a substantial edge profile compared with thinner tape, which supports a solid-feeling edge once bonded. The CP40007 LAC designation identifies a specific finish and color series, helping shops match this banding across multiple jobs. The 600ft length supplies a continuous run suitable for production environments, so longer parts and multiple pieces can be run with fewer changeovers. As an edge banding classified under Miscellaneous|Edgebanding, this product fits directly into cabinet, casework, and furniture workflows that rely on PVC banding to close out raw board edges.
This Rehau PVC edgebanding uses a 15/16 inch by 1mm format, which aligns with many automatic and manual edgebanding setups sized around near-1-inch tape. The added width beyond nominal 3/4 inch panel thickness allows for slight overhang on both sides, which is important where trimming heads or handheld trimmers are set to flush the banding to the panel. The 1mm thickness gives enough material for clean trimming without feeling overly bulky on cabinet doors or drawer fronts. Supplied in a 600ft roll, the continuous format feeds directly into edgebanders or can be cut into sections for smaller jigs, so the same material supports both production lines and bench work.
As an edge banding product in the Miscellaneous|Edgebanding category, Rehau PVC edgebanding 301799-397 is intended for closing exposed edges on panels used in cabinets, casework, and similar woodworking assemblies. The 15/16 inch width suits substrates where the finished thickness is around standard casework dimensions, giving enough coverage for both faces and edge radius where designs call for a small arris. In shops running mixed materials, the defined CP40007 LAC designation helps position this banding for panels matched to that color and finish, so face materials and edges present a coordinated appearance on doors, drawer fronts, or carcass edges. The 600ft roll length supports batch production of repeated cabinet parts where multiple identical edges must be processed with the same PVC banding.
The combination of 15/16 inch width and 1mm thickness in this Rehau edge banding supports consistent machining across many setups. The extra width beyond panel thickness lets trimming tools work with a predictable overhang, which helps maintain flush results when running many parts through the same settings. The 1mm thickness provides a stable edge during cutting and post-processing, reducing deflection at the edge that can occur with very thin tape in some fixtures. Having a clearly defined manufacturer part number, 301799-397, gives shops a precise reference when they need the same CP40007 LAC finish again, which matters when replacing damaged fronts or extending an existing installation. The 600ft continuous length also supports consistent feed tension and tracking on edgebanders, which can contribute to smoother edges across large runs.
Rehau PVC edgebanding 301799-397 uses a 15/16 inch width, which covers typical cabinet and casework panel thicknesses while leaving trim margin for flush-cutting operations on both faces.
Rehau PVC edgebanding 301799-397 at 1mm thick provides a substantial edge layer that responds well to trimming and light machining, supporting a defined edge line on finished panels.
Rehau 301799-397 identifies this specific PVC edgebanding, tying the roll to a defined CP40007 LAC finish so shops can reorder the same look for future work.
Rehau PVC edgebanding 301799-397 in a 600ft roll supports extended production runs, allowing many cabinet or furniture parts to be edged without frequent roll changes.
Rehau PVC edgebanding 301799-397 is categorized as edge banding for woodworking, so it integrates into cabinet and furniture processes that already use PVC strips on exposed panel edges.
Rehau PVC edgebanding 301799-397 uses the CP40007 LAC designation, signaling a specific finish and color family that supports consistent visual matching across projects.
Rehau PVC edgebanding 301799-397 from Rehau, Inc. combines a 15/16 inch width, 1mm thickness, and CP40007 LAC finish in a 600ft roll to support edge treatment on cabinet and panel projects. This format aligns with common woodworking edgebanding workflows, giving shops a defined PVC option tied to a specific Rehau part number for repeatable ordering and consistent edge appearance across runs and later replacements.
Sold In: 1 Roll