Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau PVC edgebanding 301799-399 is a Rehau PVC edge banding designed to cover and protect raw board edges on cabinetry and casework projects. The material is PVC, so it provides a consistent, workable edge that matches typical shop workflows using PVC tape. The banding is identified as edge banding, which lets it serve as the finishing layer over exposed substrate edges on panels. The width is 15/16 inch, giving coverage for standard 3/4 inch boards with a small margin for trimming for a flush, clean line. The thickness is 1mm, which provides a solid edge profile that can be machined, trimmed, and detailed using common edgebanding tools. The product is supplied under Rehau, Inc., so it aligns with shops already specifying Rehau PVC edgebanding systems on drawings and cut lists.
This Rehau PVC edgebanding uses a 15/16 inch width, so it overhangs both faces of a standard 3/4 inch panel for trimming passes while still covering the full edge. The 1mm thickness produces an edge that can be trimmed flush and then lightly eased or profiled while keeping a solid PVC face at the corner. The material type, PVC, works with typical edgebanding machinery or manual application setups that are already configured for PVC tape. The 600FT length described in the SAP data supports longer runs on a single coil, which works well for projects where many parts need the same edge treatment.
This product is classified as edge banding in the edgebanding category, so it serves wherever raw board edges on cabinetry, furniture, or casework need a finished PVC edge. The 15/16 inch width aligns with projects built from approximately 3/4 inch sheet goods, giving enough coverage for trimming while still keeping waste low in shop production. Because the edgebanding is PVC, it fits into workflows that already specify PVC edges on commercial or residential cabinets. The part number 301799-399 and CP40328 LAC description connect this tape to a defined Rehau reference, supporting use on jobs where drawings or prior installations call out the same code for visual and material continuity.
The 1mm thickness means this PVC edgebanding provides a firm shoulder at the edge, which helps trimming tools track cleanly without diving into the substrate, supporting consistent results across many parts. The 15/16 inch width leaves a controlled amount of overhang on typical 3/4 inch panels, so operators can run flush-trim passes and then finish with scrapers or sanding blocks while maintaining a straight edge. The 600FT length specified in the SAP description allows long production runs on one coil, which reduces downtime between jobs that use this exact Rehau PVC edgebanding 301799-399 reference. With the product defined as edge banding in the edgebanding class, shops can assign it confidently wherever a PVC tape edge is required as the final visible surface.
Rehau PVC edgebanding 301799-399 is made from PVC, so it works with standard PVC edgebanding equipment and provides a consistent, machinable edge on cabinetry and panel projects.
Rehau PVC edgebanding 301799-399 has a width of 15/16 inch, giving coverage over typical 3/4 inch boards with enough overhang for trimming to a clean, flush edge.
Rehau PVC edgebanding 301799-399 is 1mm thick, providing a substantial edge that supports trimming, light profiling, and finishing without cutting through to the panel core.
The 600FT length described in the SAP data supports extended production runs, so shops can edge multiple components with the same Rehau PVC edgebanding 301799-399 without frequent material changeovers.
The 301799-399 manufacturer part number uniquely identifies this specific Rehau PVC edgebanding, helping match project specifications, reorders, and color references in shop documentation.
The CP40328 LAC designation in the description ties the Rehau PVC edgebanding 301799-399 to a defined Rehau reference, supporting consistent appearance across coordinated cabinet or casework runs.
Rehau PVC edgebanding 301799-399 combines 15/16 inch width, 1mm thickness, and a 600FT length to support efficient edging of 3/4 inch panel projects. The defined Rehau part number and CP40328 LAC reference help align this edge banding with documented shop standards and repeat jobs. For cabinet, furniture, or casework runs built around PVC edges, this Rehau PVC edgebanding fits neatly into production where a 15/16 inch by 1mm PVC tape is specified.
Sold In: 1 Roll