Rehau PVC edgebanding 301799-402 is a PVC edge banding product from Rehau, Inc. that covers and finishes exposed edges on panels, so cabinet and fixture edges present a consistent, finished surface. The 15/16 inch width gives coverage over standard panel thicknesses with room for trimming, which supports tight visual lines along doors, shelves, and casework. The 1mm thickness provides a defined edge profile, helping edges stay substantial rather than overly thin when machined and finished on site. The CP60011 designation identifies the specific PVC formulation and color or pattern family, keeping projects consistent when the same edge detail is needed across multiple runs. Supplied in a 600FT length, this edgebanding supports long production runs and repeat jobs from a single part number, which reduces changeovers during cutting and application.
This Rehau PVC edge banding is specified as 15/16X1MM CP60011 LAC 600FT, so installers know they are working with a 15/16 inch wide, 1mm thick PVC strip in a 600 foot continuous length. That format supports feeding into common edgebanding stations and manual application setups that accept 1mm PVC material. The known width and thickness help shops set trimming and flush-routing stations once for a run, then repeat settings when the same 301799-402 part is used again. By tying projects to this specific SAP description and manufacturer part number, shops can match previous workpieces where the same edge dimension and appearance were used.
This Rehau PVC edgebanding, in the edge banding product class, is suited to covering exposed board edges wherever a 15/16 inch wide, 1mm thick PVC strip is appropriate, such as panel and cabinet edges built around similar dimensions. The 15/16 inch width gives enough coverage to span the full edge of many common sheet goods with slight overhang, so trimmers can take a light pass and leave a clean flush finish on both faces. Because the product is supplied as a 600FT length, it supports repetitive applications across multiple cabinets, shelves, or panels within the same project, which keeps the visible edges consistent room to room or across a larger installation. The Rehau, Inc. branding and CP60011 designation anchor the product identity, so shops can specify the same edge detail on drawings and job tickets.
The 1mm thickness of this PVC edgebanding gives a measurable edge dimension that responds predictably to standard trimming and routing setups, which helps operators dial in settings and repeat them every time 301799-402 is loaded. The 15/16 inch width offers predictable overhang, which lets installers run straight-line banding, then trim without risking short coverage on either face when alignment is slightly off. The defined 600FT roll length allows planners to estimate linear footage needs for runs of doors, drawer fronts, and panels based on known edge-per-part totals, reducing changeovers during a batch. Because the SAP description and manufacturer part number are fixed as 301799-402 with CP60011 LAC terminology, project documents can call out this exact edgeband so replacements and future phases align with the original edges.
Rehau PVC edgebanding 301799-402 is specified as 15/16X1MM, so it provides a 15/16 inch wide, 1mm thick edge strip that suits applications calling for that coverage and thickness.
Rehau PVC edgebanding 301799-402 in a 600FT length supports longer production runs from a single roll, which reduces material changeovers during edgebanding operations.
Rehau PVC edgebanding 301799-402 uses the CP60011 LAC designation to identify a specific formulation and appearance family, helping projects repeat the same visual edge detail.
Rehau PVC edgebanding 301799-402 at 1mm thickness provides a defined edge that trims and routes cleanly, supporting a solid-feeling edge profile on panels and components.
Rehau PVC edgebanding 301799-402 at 15/16 inch width gives coverage across the panel edge with room to trim, which supports flush alignment on both faces after machining.
Rehau PVC edgebanding 301799-402 uses this manufacturer part number so shops can reorder the same edge banding and keep future work visually consistent.
This Rehau PVC edgebanding 301799-402 from Wurth Baer Supply ties width, thickness, length, and CP60011 LAC identity into one repeatable part. Using the defined 15/16X1MM 600FT format lets shops plan runs, set up edgebanding equipment, and reference the same edge detail on future projects with a single, consistent product choice.
Sold In: 1 Roll