Rehau PVC edgebanding 301799-415 is a PVC edge banding designed to finish exposed panel edges so cut board perimeters match the surface visually and feel smooth in use. The 15/16 inch width covers standard panel thicknesses with some overhang, giving room to trim both faces clean after application. The 1mm thickness provides a solid edge profile that can be machined and flushed without feeling flimsy at corners. The CP41034 reference identifies the specific design variant, helping match this roll to existing jobs that already use that code. The embossed lacquer finish gives the PVC surface a textured, coated appearance, so the edge line looks more like a finished component rather than raw plastic. Supplied as a 600ft length, this edgeband supports longer production runs or consistent repairs from the same code.
The 15/16 inch width on this Rehau PVC edge banding gives installers coverage beyond standard panel thicknesses, so the material can be centered, bonded, and then trimmed back for a tight, even edge. Its 1mm thickness provides enough body for typical edge-banding tools to track accurately along the panel, reducing the risk of cutting through or creating low spots at corners. Because the product is PVC, it responds predictably under common edge-banding workflows that shape and finish synthetic edges on cabinetry and related components.
This Rehau PVC edgebanding, identified as 301799-415 and CP41034, is positioned for applications where a PVC edge is required on boards that need a finished perimeter. The 15/16 inch width works well wherever the substrate edge is near three-quarters of an inch thick, with enough extra banding to trim for a precise line. Its 1mm thickness supports furniture and cabinetry edges that benefit from a more substantial feel compared to ultra-thin edging, which can feel sharp at high-contact points. The embossed lacquer finish suits jobs that call for a textured, coated appearance along the edge, aligning the perimeter look more closely with decorative surfaces used in casework or similar constructions. The 600ft length serves shops or installers handling repeated work with the same specification, allowing multiple cabinets, shelves, or panels to be processed from one continuous edgeband code.
The defined 15/16 inch by 1mm dimension on this PVC edge banding makes machine setups repeatable from part to part, because width and thickness stay consistent across the 600ft run. That consistency supports stable trimming and scraping settings, which helps keep reveals and corners uniform on jobs that rely on a matched appearance. The CP41034 designation and manufacturer part number 301799-415 give an exact reference for reorders, so replacement lengths will align visually with earlier work using the same identifiers. With an embossed lacquer surface, the texture and coated look are built into the band, so every length from the roll presents the same appearance wherever it is applied on the project. Being part of the Rehau PVC edgebanding line, this product aligns with workflows that already use PVC edges in shop production, helping maintain continuity of material behavior during cutting, trimming, and finishing passes.
Rehau 301799-415 PVC edgebanding is specified at 15/16 inch width by 1mm thickness, giving coverage for typical panel edges with enough material for trimming to a clean profile.
The CP41034 reference identifies the specific design variant of this PVC edgebanding, helping match new material to existing components that use the same visual and finish code.
The embossed lacquer finish gives the PVC surface a textured, coated look, so finished edges appear more like treated panel surfaces and less like plain plastic strips.
The 15/16 inch width extends beyond common panel thicknesses, enabling installers to align, bond, and trim back the edges to create straight, flush lines on both faces.
This 1mm PVC edgebanding suits cabinet, furniture, or shelving work where a more substantial edge feel and consistent machined profile are desired along exposed board perimeters.
The 600ft length supports extended production runs, letting shops process multiple components with the same edgeband code for consistent appearance across an entire project.
The Rehau PVC edgebanding 301799-415 combines a 15/16 inch by 1mm dimension, CP41034 identification, embossed lacquer finish, and 600ft length to support repeatable edge finishing on cabinetry and related projects. For work that depends on matching visual codes and stable machine settings across many components, this specific PVC edge banding offers a defined size and appearance profile that can be applied from part to part.
Sold In: 1 Roll