Rehau PVC edgebanding 301799-417 is a PVC edge banding from Rehau, Inc. that covers and finishes exposed panel edges, so cabinet and furniture projects present a uniform edge instead of raw core material. This edgebanding belongs to the Edge Banding product class in the Miscellaneous|Edgebanding category, giving installers a targeted option when specifying edge treatment on jobs. The SAP description 15/16X1MM CP41425 EMB LAC 600FT identifies it as a 15/16 inch wide, 1 mm thick PVC strip, providing an edge that visually matches typical panel thicknesses while maintaining a slim, manageable profile for handling. The 600FT length described in the SAP data supports longer production runs or multiple installations from a single product, which helps reduce roll changes and keeps setups consistent across a project.
The SAP description 15/16X1MM CP41425 EMB LAC 600FT defines this Rehau PVC edgebanding as 15/16 inch wide and 1 mm thick in a 600 foot length, giving installers a clearly defined strip size to set up on their edgebanding machines and trimmers. The 15/16 inch width provides coverage for common panel dimensions, supporting an edge that can be trimmed back to a flush line without leaving exposed core. The 1 mm thickness keeps the edge profile manageable for machining while still delivering a noticeable, consistent band. The continuous 600 foot roll length supports loading the roll once and running multiple cabinets or furniture pieces, helping keep alignment and feed conditions stable during installation.
This Rehau PVC edgebanding, identified as 301799-417 and classified under Edge Banding in the Miscellaneous|Edgebanding category, is positioned for woodworking projects that need a PVC edge treatment on panel constructions. The 15/16 inch width from the 15/16X1MM SAP description aligns with typical cabinet and furniture panel thicknesses, so it serves well along sides, tops, and shelves where a finished edge is required. Because it is recognized specifically as PVC edgebanding, it suits applications where a synthetic, uniform edge is preferred over exposed substrate, whether in shop-built casework or other panel-based assemblies. The 600FT length called out in the SAP description supports use on multi-unit jobs, allowing the same Rehau PVC edgebanding to be applied across an entire run so color and profile remain consistent from part to part.
The 15/16 inch width and 1 mm thickness described in the SAP data give installers fixed reference points for machine settings, which helps reduce test cuts and dialing-in time on edgebanders and trimmers. With a defined 1 mm thickness, pressure, heat, and trimming depth can be set once to match this Rehau PVC edgebanding, supporting repeatable edge quality across many pieces. The 600FT length noted in the SAP description lets shops run long sequences without swapping rolls, which helps maintain the same feed tension and tracking from cabinet to cabinet. Using a single manufacturer part number, 301799-417, to specify this edge banding also keeps ordering and inventory aligned to one consistent PVC profile, which supports straightforward replacement or expansion work using the same visible edge treatment.
Rehau 301799-417 is a PVC edge banding from Rehau, Inc., so it serves as a finishing strip for covering exposed edges on panel-based woodworking and cabinet components.
The Rehau PVC edgebanding 301799-417 has a width of 15/16 inch as stated in the 15/16X1MM SAP description, which matches common panel thicknesses for edge coverage and trimming.
This Rehau PVC edge banding is 1 mm thick according to the 15/16X1MM SAP description, providing a defined but manageable edge for machining and trimming operations.
The Rehau PVC edgebanding 301799-417 is supplied in a 600FT length as indicated in the SAP description, supporting extended production runs from a single roll setup.
Rehau 301799-417 edge banding is identified as PVC in the product name, giving it a consistent synthetic surface suited to woodworking edgebanding equipment.
The manufacturer part number 301799-417 uniquely identifies this Rehau PVC edgebanding, so shops can match the exact same edge profile when reordering for ongoing work.
Rehau PVC edgebanding 301799-417 provides a 15/16 inch wide, 1 mm thick PVC strip in a 600FT length, as detailed in its SAP description, giving installers a clearly specified edge banding for panel work. The Edge Banding classification and Miscellaneous|Edgebanding category positioning show its role as a dedicated edging solution rather than a general trim. Using the Rehau, Inc. manufacturer part number 301799-417 ties each job to the same PVC edge profile, supporting visual continuity when projects expand or repeat. Put this defined Rehau PVC edge banding into service wherever exposed panel edges need a finished, uniform PVC edge.
Sold In: 1 Roll