Rehau PVC edgebanding 301799-419 provides a PVC edge banding solution that covers and protects panel edges so finished work presents a consistent appearance from face to edge. The 15/16 inch by 1mm size gives coverage for common panel thicknesses with a little overhang to trim, so installers can flush the edge precisely to the surface. The CP41191 reference in the description identifies a specific decor, helping shops match this banding to corresponding board stock in their workflow. The embossed lacquer surface noted in the description adds a textured, lacquered finish, so the edge visually coordinates with similar structured faces in cabinet or furniture runs. Supplied in a 600 ft length, this edgebanding supports longer production runs or multiple jobs from one roll, so shops can set up once and run repeated parts without frequent material changes.
The 15/16 inch by 1mm sizing stated in the description gives installers a clear expectation for coverage and profile, which supports accurate machine setup on edgebanders or manual application fixtures. The 15/16 inch width leaves a practical amount of overhang beyond common panel thicknesses, so trimming tools can cut back to a smooth, consistent line without exposing the core. The 1mm thickness creates a defined edge that reads as a design element on doors, drawer fronts, and casework parts, which is useful when selecting banding to match the visual weight of a project. With the embossed lacquer finish identified as EMB LAC, edge appearance and texture can be planned to coordinate with compatible decorative surfaces across a job.
This Rehau PVC edgebanding, identified as 301799-419 and described as 15/16X1MM CP41191 EMB LAC, is suited to applications where a PVC edge is required on panels in cabinetry or similar woodworking projects. The 15/16 inch width works with standard panel formats where a slight excess is preferred for trimming, so both straight parts and shaped components can be finished to a consistent edge. The CP41191 decor designation lets production planners align this banding with matching decorative boards, which helps maintain visual continuity across doors, drawer fronts, and cabinet sides that share the same finish family. With the embossed lacquer surface, the banding supports projects that use structured or lacquer-look designs, so the edge appearance complements rather than contrasts with the chosen panel surface.
The defined 1mm thickness stated in the description allows edgebander settings to be dialed in for pressure, trimming, and scraping based on a known edge dimension, so operators can maintain repeatable results from part to part. Using a 15/16 inch wide band on appropriate panels provides consistent overhang, so top and bottom trimmers engage the same amount of material and reduce setup variation between jobs. The 600 ft roll length supports longer uninterrupted runs, so once feed settings are established, many identical components can be processed under the same configuration. Because the material is PVC, tooling and feed speeds can be selected around that specific material behavior, which helps control cut quality and reduce visible edge defects along doors, tops, and cabinet sides.
Rehau PVC edgebanding 301799-419 is listed as 15/16 inch wide and 1mm thick, which provides coverage with trim allowance and a defined edge profile on compatible panel thicknesses.
The description 15/16X1MM CP41191 EMB LAC indicates a specific CP41191 decor with an embossed lacquer surface, so the edge texture and look coordinate with that matching finish program.
The SAP description lists 600FT, so this edgebanding is supplied in a 600 foot length suited to extended production runs or multiple smaller cabinet jobs.
Rehau 301799-419 is identified as PVC edgebanding, so it provides a PVC edge cover over panel cores in cabinet, furniture, or similar panel-based constructions.
The 15/16 x 1mm PVC edgebanding format serves panel edges in woodworking projects such as cabinetry or furniture components that match the CP41191 embossed lacquer decor.
The stated 1mm thickness allows edgebander adjustments to be set around a known edge dimension, supporting consistent trimming and scraping across repeated cabinet or panel parts.
This Rehau PVC edgebanding 301799-419 combines a 15/16 inch by 1mm profile, CP41191 decor, and embossed lacquer finish in a 600 ft length, giving shops a defined, repeatable edge solution for compatible panel programs. When a project specifies this decor and texture, choosing this banding aligns edge appearance, thickness, and width with the panel design so doors, fronts, and case parts share the same visual story from face to edge.
Sold In: 1 Roll