Rehau PVC edgebanding 301799-421 provides an edge treatment that covers and protects exposed panel edges, giving casework and cabinetry a finished look that matches your layout plan. This edgebanding is part of the Rehau, Inc. edge banding product class, so it is designed specifically for edging applications on wood-based components in woodworking environments. The 15/16 inch width works with common panel thicknesses where a slight overhang is trimmed back for a flush edge, helping you achieve a straight, clean line after trimming. The 1mm thickness offers a substantial edge profile compared to thinner tapes, which supports crisp machining, consistent trimming, and a solid feel at the edge. With a 600ft length noted in the description, this coil supports longer runs or multiple cabinet jobs from a single product, reducing changeovers during production.
This Rehau PVC edge banding is specified at 15/16 inch by 1mm, so installers can work with a familiar overhang during application and trim it back to a precise flush edge. The 1mm thickness gives tools enough material to bite cleanly during edge trimming and scraping, which supports smooth edges without chatter. The embossed lacquer surface noted as EMB LAC is prepared as a finished face, so once bonded and trimmed it presents a ready-to-use edge appearance that aligns with the chosen CP60446 design. The extended 600ft coil length also supports continuous feeding through edge banders, which can streamline workflow on repetitive cabinet, closet, or fixture components.
The 15/16 inch width of this Rehau PVC edgebanding allows it to cover typical panel thicknesses while leaving enough overhang for trimming, which is important when running parts through automatic or manual edge trimming equipment. The 1mm thickness works well on cabinet sides, shelves, and doors where a more substantial edge is preferred, because it gives a noticeable profile without being bulky. Being part of the Rehau edge banding class, this product is intended for edge treatment on wood-based substrates often used in cabinetry and casework, so it fits naturally into woodworking shop processes. The CP60446 designation and embossed lacquer (EMB LAC) description help maintain a consistent decorative look from panel to panel, which matters when doors, drawer fronts, and cabinet boxes are aligned in a bank.
The combination of a defined 1mm thickness and an embossed lacquer surface gives this Rehau PVC edgebanding predictable behavior under cutters, because the material cross-section and face finish are known values during setup. Installers can use the 15/16 inch width as a stable starting dimension, setting edge bander and trimmer positions to leave a controlled overhang and then remove it cleanly. The CP60446 reference, paired with the 301799-421 part number, simplifies reordering the same appearance for future work, which supports repeat jobs or add-on cabinets that must match earlier installations. The 600ft coil length helps maintain color and texture consistency across many parts in a single run, reducing the chance of a visual shift within one project. For shops running mixed work, the clearly defined size and surface description allow this edgeband to be slotted into job planning alongside other edgebanding profiles.
Rehau PVC edgebanding 301799-421 is specified at 15/16 inch wide and 1mm thick, giving coverage with trim allowance and a solid edge profile on typical cabinetry panels.
The 1mm thickness provides enough material for trimmers and scrapers to cut cleanly, supporting smooth, crisp edges on cabinet parts after machining.
The CP60446 EMB LAC description identifies a specific embossed and lacquered design, helping maintain a consistent decorative appearance across matching components.
This Rehau PVC edgebanding is in the edge banding product class, so it is used on exposed edges of wood-based panels in cabinetry and woodworking projects.
The 600ft length supports long or repeated production runs, which helps keep color and texture consistent from part to part during cabinet or fixture fabrication.
Edgebanding 301799-421 is manufactured by Rehau, Inc., and is supplied by Wurth Baer Supply for woodworking and cabinetry applications.
This Rehau PVC edgebanding 301799-421 gives you a defined 15/16 inch by 1mm profile, an embossed lacquer CP60446 surface, and a 600ft coil length that suits extended cabinet or panel runs. Putting this specific part number into your job planning helps maintain consistent appearance and edge sizing from one project to the next. For shops and serious DIY users working with wood-based panels, this edge banding fits directly into standard edging workflows and supports clean, repeatable results across multiple components.
Sold In: 1 Roll