Rehau PVC edgebanding 301799-424 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cut board faces match the project design and stay protected in service. This product is defined as edge banding in the miscellaneous edgebanding category, so it is intended for closing off raw edges on cabinetry, furniture components, and similar casework. The SAP description specifies 15/16 x 1mm dimensions, giving a workable width for standard 3/4 inch panels with overhang to trim and a 1mm thickness for a solid edge profile. The CP30287 embossed lacquer reference in the SAP description identifies an embossed lacquer surface, which provides a textured, finished look directly from the banding. The 600 ft designation in the SAP description indicates a long run length that supports shop production without frequent changeovers or material interruption during repeated panel processing.
The SAP description detail of 15/16 x 1mm defines how this Rehau PVC edge banding fits into an installation workflow on standard sheet goods. The 15/16 inch width gives slight coverage beyond a nominal 3/4 inch panel, allowing fabricators to align the banding, bond it along the edge, and then trim the overhang back to a flush, clean line. The 1mm thickness establishes a defined edge profile that works well with common trimming and scraping tools used in woodworking shops. Identifying the product as PVC edgebanding sets the expectation that it will be applied along raw board edges, so fabricators can plan machining, bonding, and trimming steps around a known thickness and width.
The SAP description and product classification identify this Rehau PVC edgebanding 301799-424 as edge banding for woodworking applications that need exposed panel edges finished. Being part of the miscellaneous edgebanding category at Wurth Baer Supply, it aligns with cabinet, furniture, and fixture work where raw core material would otherwise be visible. The 15/16 inch width called out in the SAP description pairs naturally with projects built from nominal 3/4 inch panels, giving fabricators enough coverage to align the strip accurately. The 1mm thickness works for edges that must stand up visually alongside decorative faces, so completed runs show a defined, consistent border. The CP30287 embossed lacquer surface from the SAP description positions this banding where a textured, lacquered appearance is desired across all visible edges in a job.
The defined 15/16 x 1mm sizing in the SAP description gives installers and shop operators predictable material behavior along every edge. A 15/16 inch width provides consistent overhang beyond 3/4 inch substrates, which supports the use of standard trimming passes to achieve the same reveal from part to part. The 1mm thickness creates a measurable edge that works with edge-trimming and scraping equipment, helping maintain uniform lines when parts are stacked or aligned in assemblies. The CP30287 embossed lacquer reference also matters for repeatability because it ties the edgebanding surface to a specific embossed lacquer pattern, so every length from this product maintains the same visual and tactile finish. Combined with the 600 ft run length from the SAP description, shops can run many parts in one sequence using the same banding code, promoting visual continuity across large projects.
Rehau PVC edgebanding 301799-424 is listed in the SAP description as 15/16 x 1mm, giving a width for 3/4 inch panels with trimming allowance and a defined 1mm edge thickness.
The CP30287 embossed lacquer notation in the SAP description identifies an embossed lacquer surface, so the edge presents a textured, finished appearance matching projects using this surface code.
The 600 ft measure in the SAP description indicates a long run length, allowing extended edge banding operations on multiple panels without frequent material changes during processing.
Rehau 301799-424 is identified as Rehau PVC edgebanding and classified in the edge banding product class, so it is intended for finishing exposed panel edges.
This PVC edgebanding is applied along raw panel edges, then trimmed back from its 15/16 inch width, giving a flush, consistent border around cabinetry or furniture components.
The 1mm thickness specified in the SAP description creates a solid edge profile that works with common trimming tools, supporting clean, repeatable panel edge finishes.
This Rehau PVC edgebanding 301799-424 from Wurth Baer Supply combines a defined 15/16 x 1mm size, CP30287 embossed lacquer surface, and 600 ft length so woodworking shops can plan consistent, extended edging runs. Using this edge banding where 3/4 inch panels need finished faces lets fabricators align, bond, and trim to a predictable profile on every part. For projects built around this specific CP30287 surface and dimension set, choosing this product supports uniform panel edges across cabinets, furniture, and other casework.
Sold In: 1 Roll