Rehau PVC edgebanding 301799-429 is a PVC edge banding designed to finish exposed panel edges so they present a clean, uniform surface on cabinets and casework. The 15/16 inch width covers standard panel thicknesses with a bit of overhang, giving installers room to trim the banding flush for a straight finished edge. The 1mm thickness adds a solid feel at the edge compared with very thin tapes, which helps panels stand up to everyday contact at doors, drawer fronts, and work surfaces. The CP20565 designation and embossed lacquer finish identify a specific decorative and surface treatment combination, so multiple parts on the same job can share the same visual edge detail. The 600FT length in a single run supports extended production or multi-cabinet projects, reducing changeovers during fabrication.
This Rehau PVC edge banding uses a 15/16 inch width to span common substrate thicknesses with extra material at each edge, which simplifies trimming for straight, chip-free edges on cabinets and furniture panels. The 1mm thickness offers a noticeable edge profile that supports routing and scraping operations without feeling overly bulky on standard casework. The CP20565 embossed lacquer finish provides a defined surface texture and coating that can align with selected decorative faces, helping finished parts present a continuous look from face to edge. The 600FT reel length allows extended use on an edgebanding machine, which supports uninterrupted processing of matched components across a full job.
This Rehau PVC edgebanding, identified by part number 301799-429, is suited to cabinet and woodworking projects where exposed panel edges need to be covered with a PVC edge banding rather than left raw. The 15/16 inch format gives cabinet shops a good fit for typical case sides, shelves, and fronts built from standard sheet goods, since the banding extends slightly past the faces before trimming. The 1mm thickness supports applications on both vertical and horizontal edges, such as doors, drawer fronts, end panels, and interior partitions, where a defined edge is preferred. The CP20565 embossed lacquer surface aligns this banding with a particular decorative style, which helps maintain a coordinated appearance across doors, frames, and carcass edges that share the same finish family. The 600FT roll length supports production runs where many parts use the same edging profile.
The 15/16 inch width on this Rehau PVC edge banding gives a consistent amount of material to trim away across different panel thicknesses, which promotes repeatable edge quality from part to part. The 1mm thickness provides enough PVC mass for controlled trimming, scraping, and corner rounding, helping installers produce smooth transitions between faces and edges without fragile, thin lips. The CP20565 code and embossed lacquer finish identify a specific texture and color system, which supports repeat orders when shops want to match existing work by the same reference. The 600FT continuous length reduces the number of coil changes during edgebanding, which helps maintain setup conditions and edge appearance across a long sequence of cabinet components.
The 15/16 inch width on this Rehau PVC edgebanding spans typical panel thicknesses with extra width, giving installers trimming room to create clean, flush edges on cabinet parts.
The 1mm thickness of this PVC edge banding creates a more substantial edge profile, supporting routing and scraping for a solid-feeling, durable cabinet edge detail.
The CP20565 embossed lacquer description identifies a specific decorative and surface treatment combination, helping match this edgebanding to coordinated panel finishes on projects.
The 600FT roll length lets an edgebanding machine run longer between changeovers, supporting continuous processing of doors, shelves, and panels with the same edge detail.
The Rehau 301799-429 part number ties together the 15/16 inch width, 1mm thickness, CP20565 design, and surface finish so repeat orders match previous cabinet work.
This Rehau PVC edge banding suits cabinet sides, doors, drawer fronts, shelves, and partitions where a coordinated CP20565 embossed lacquer edge is needed.
Choose Rehau PVC edgebanding 301799-429 when a 15/16 inch by 1mm PVC edge banding is needed to finish cabinet and furniture panels with a specific CP20565 embossed lacquer design. The defined width, thickness, and 600FT roll length support streamlined edgebander setups across related parts. The Rehau 301799-429 identification links this banding to its exact decorative system, helping shops keep future orders consistent when repeating the same cabinet program or finish family.
Sold In: 1 Roll