Rehau PVC Edgebanding 301799-435 For Clean Edges

Rehau PVC edgebanding 301799-435 is a PVC edge banding designed to finish exposed panel edges, so cabinet, furniture, and fixture projects present a clean, uniform look around their perimeter. The 15/16 inch nominal width stated in the SAP description gives coverage over common 3/4 inch panels, leaving enough overhang for trimming and a precise final line along the edge. The 1mm thickness described in the SAP data adds a defined edge profile, which supports a solid feel at high-contact areas such as cabinet doors and shelf fronts. The CP41293 reference in the SAP description identifies a specific decor or program within Rehau PVC edgebanding, helping match this edge to corresponding board or laminate designs in a shop workflow. The 600ft length called out in the SAP description provides extended run capacity, which reduces roll changes during production runs and supports consistent results across multiple parts in the same job.

Key Rehau Edgebanding Details That Support Work

• The 15/16 inch nominal width from the SAP description covers typical 3/4 inch substrates, giving installers trimming allowance that helps achieve flush, straight edges on cabinet and furniture components.
• The 1mm thickness listed in the SAP description provides a defined PVC edge, supporting a solid edge profile that stands up well at doors, drawer fronts, and shelving where hands regularly contact the finished edge.
• The PVC material identified in the product name delivers a thermoplastic edge suitable for standard edgebanding equipment, which helps shops integrate this roll into established banding, trimming, and finishing workflows.
• The manufacturer part number 301799-435 ties this Rehau PVC edgebanding directly to a specific color or decor line, helping maintain visual continuity when repeating or expanding a project at a later date.
• The 600ft length referenced in the SAP description offers a long production run from a single roll, which supports efficient processing of multiple cabinets or casework components without frequent material changeovers.

Edgeband Fit, Width, And Thickness In Application

The 15/16X1MM sizing in the SAP description defines how this Rehau PVC edgebanding fits onto workpieces, giving both coverage and predictable trim margins in the shop. On 3/4 inch panel stock, the stated 15/16 inch nominal width provides edge coverage plus overhang, so banding equipment can trim back to a clean, flush edge without exposing core material. The specified 1mm thickness establishes the edge profile height at the panel face, which influences how the edge feels to the touch and how it aligns with adjacent components in assembled casework. Because the product is classified as edge banding, it is intended to be applied along linear panel edges, supporting a consistent geometry that works well with standard straight-line and contour edgebanders.

Where Rehau PVC Edgebanding 301799-435 Fits Best

Using This PVC Edgebanding On Panel Projects

This product is identified as Rehau PVC edgebanding within the edgebanding category, so it is suited to woodworking projects that rely on laminated or engineered panels. The 15/16 inch nominal width from the SAP description matches edge coverage needs for cabinet boxes, doors, drawer fronts, and shelving built from 3/4 inch material, supporting a consistent reveal across the job. As an edge banding product, it is meant to run along exposed edges of casework, furniture, and fixtures, tying the edge appearance back to the chosen decor referenced through CP41293. The 600ft length in the SAP description supports shop environments that process repeated components, so installers and fabricators can carry the same edge detail through base, wall, and tall cabinets in a coordinated project.

Why The 15/16X1MM Dimensions Support Consistency

The 15/16X1MM CP41293 EMB LAC 600FT detail from the SAP description condenses the practical sizing and format that matter in day-to-day use. The 15/16 inch nominal width gives enough extra material beyond a 3/4 inch core, so trimming operations can remove minor alignment variation while still leaving a full edge cover. The 1mm thickness keeps the edge banding substantial enough to form a defined corner while staying within the range commonly handled by standard edgebanders and trimmers. The 600ft roll length allows longer continuous runs, reducing color shift risk between pieces because all edges can be processed from the same roll. The manufacturer part number 301799-435 aligns all of these attributes to a specific Rehau item, making it easier for shops to repeat orders and hold the same look and feel across future work.

Common Questions About Rehau 301799-435 Edgebanding

Select Rehau PVC Edgebanding 301799-435 For Your Run

Rehau PVC edgebanding 301799-435 combines a 15/16 inch nominal width, 1mm thickness, and 600ft length, as documented in the SAP description, to support efficient finishing of exposed panel edges. For shops running cabinets, furniture, or fixture components from similar decor programs, the CP41293 reference and defined dimensions help maintain a repeatable edge look across current and future work. When a project calls for PVC edge banding sized for 3/4 inch stock with trimming allowance, this Rehau part number provides a clearly specified option that aligns material planning with production needs.