Rehau PVC Edgebanding 301799-483 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so fabricated parts present a consistent, finished look across a run. The 15/16 inch width gives coverage across standard panel thicknesses while allowing a bit of trimming margin, which helps keep edges straight after machining. The 1mm thickness provides a substantial edge profile that handles typical cabinet and casework use while still working well with standard edgebanders and trimmers. The CP10121 designation identifies the specific decor in the Rehau line so the same material can be ordered again for follow-up jobs. The EMB LAC description indicates an embossed, lacquered surface that creates a defined texture and sealed finish in one step, saving separate finishing passes at the edge. The 600ft length is suited to production or multi-cabinet runs where continuous material supports steady workflow.
This Rehau PVC Edgebanding measures 15/16 inch across, giving full coverage for typical panel thicknesses plus extra material for trimming, which helps maintain a clean line after edge machining. The 1mm thickness means the banding feeds predictably through common edgebanders and responds well to edge trimming tools, so installers can bring the edge flush without excessive passes. The EMB LAC designation identifies an embossed, lacquered finish that is already on the material, so the edge acquires its texture and sealed surface during application instead of needing separate edge finishing steps.
This Rehau PVC Edgebanding, identified by manufacturer part number 301799-483, is an edge banding product in the Wurth Baer Supply edgebanding category, so it is suited to applications that call for PVC edge treatment on panels. The 15/16 inch width aligns with jobs using sheet goods where edges need to be covered to finish cabinet sides, shelves, or similar components. Because the material is specified as PVC edge banding, it supports projects where a synthetic edge is preferred over exposed substrate. The EMB LAC description points to an embossed, lacquered surface on the banding, giving the edge both defined texture and a sealed finish when it is applied, which fits casework or cabinet work that benefits from a consistent edge appearance from part to part on a job.
The 1mm thickness of this PVC edge banding affects how it behaves during both application and trimming, giving an edge that is substantial enough to feel solid while still cutting cleanly on typical trimming heads. The 15/16 inch width offers a small amount of overhang on standard panels, which provides working room for trimming tools to produce a straight, flush edge without risking exposure of the panel core. The CP10121 decor identifier ties the visual appearance of this edgebanding to a specific Rehau reference, which allows the same edge look to be repeated accurately when additional components or replacement parts are fabricated later. The EMB LAC embossed, lacquered finish means that once this edge banding is applied, the edge already carries its texture and sealed surface, which supports an efficient sequence where edge finishing is handled as part of the banding step rather than as a separate operation.
Rehau PVC Edgebanding 301799-483 is specified as 15/16 inch wide and 1mm thick, which provides coverage with trim allowance while remaining compatible with standard edgebanding and trimming equipment.
The CP10121 code in the description identifies the specific Rehau decor, so the same visual appearance can be ordered again by referencing the same part number on future work.
The EMB LAC description indicates an embossed, lacquered surface on the PVC edgebanding, so edges gain both defined texture and a sealed finish as part of the banding step.
The SAP description specifies 600ft, giving a length suited to production runs or multi-cabinet projects where continuous material supports consistent setup conditions.
This product is described as Rehau PVC Edgebanding, meaning the edge material is PVC, which provides a synthetic edge suitable for typical woodworking and cabinet applications.
The 1mm thickness on this Rehau PVC Edgebanding provides a substantial edge profile that trims cleanly, supporting a finished edge that feels solid on cabinet-grade components.
The Rehau PVC Edgebanding 301799-483 from Rehau, Inc. combines a 15/16 inch width, 1mm thickness, and EMB LAC embossed, lacquered finish to deliver a defined, sealed edge in a single step. The CP10121 decor identifier and 600ft length support repeatable appearance and longer production runs under consistent setup. For cabinet, casework, or similar projects that call for PVC edge banding with these dimensions and finish characteristics, this part number aligns material selection directly with the specified edge profile.
Sold In: 1 Roll