Rehau PVC edgebanding 301799-489 provides a PVC edge banding solution that covers exposed panel edges so cabinet and furniture projects have a finished look and protected substrate. The 15/16 inch width works with panels that need full coverage over the edge and a slight overhang for trimming, which supports clean, straight final edges after processing. The 1mm thickness gives a solid PVC edge profile that handles machining on typical edgebanders. The material is PVC, so it matches common shop processes that use routing and trimming for edge work. The designation CP41673 EMB LAC identifies a specific decorative and surface combination in the Rehau line, which helps maintain consistent appearance across multiple jobs. The 600 foot length in the product description supports longer runs or multiple smaller projects from a single coil, which reduces changeovers during production.
This Rehau PVC edgebanding uses a 15/16 inch nominal width, which aligns well with panels that will be edge banded then trimmed back to final dimension. The 1mm thickness works with standard edgebanders that are set up for thin PVC stock, so feed and trim stations can be dialed in around a known material gauge. Because the edgebanding is PVC, it suits common edge-processing workflows in woodworking shops that use machining, scraping, and buffing on synthetic edges. The CP41673 EMB LAC identification in the description provides a precise reference for finish and texture selection at setup or replacement time.
Rehau PVC edgebanding 301799-489 functions as edge banding for panels in cabinet, furniture, or general woodworking projects where exposed edges need a PVC finish. The 15/16 inch width offers enough coverage for typical panel thicknesses plus a small overhang, so edges can be processed to a flush line without leaving raw substrate. With a 1mm PVC profile, the material provides a defined edge that responds predictably to trimming, scraping, and light profiling, which helps keep seams tight and visual lines straight across multiple parts. The CP41673 EMB LAC reference ties this product to a particular Rehau appearance, supporting visual consistency when this same edge detail is applied across cabinets, doors, or casework built in different batches.
The defined 1mm thickness of this PVC edgebanding supports repeatable machine settings, because once equipment is tuned for this gauge, similar runs can follow the same parameters. The 15/16 inch width also gives a predictable amount of overhang for trimming, helping reduce rework from over- or under-size edges. Using the specific manufacturer part number 301799-489 and the CP41673 EMB LAC designation connects this product to a consistent Rehau finish, which simplifies reordering for projects that must match existing installations. The fact that this product is identified as PVC edgebanding in the Edge Banding product class keeps its role clear in the shop, so it can be planned into cut lists and edge operations alongside other panel-processing steps.
Rehau PVC edgebanding 301799-489 has a 15/16 inch width, which provides coverage over typical panel edges and leaves a small overhang for trimming to a flush final edge.
Rehau PVC edgebanding 301799-489 has a 1mm thickness, giving enough PVC material for standard edgebander trimming and scraping while maintaining a defined edge profile.
Rehau 301799-489 edgebanding is PVC, which suits machining, routing, and trimming processes commonly used for synthetic edge treatment on panels.
The CP41673 EMB LAC code identifies a specific Rehau finish and surface look, helping shops match this edgebanding to other components using the same designation.
The 301799-489 part number ties directly to this exact Rehau PVC edgebanding, supporting consistent reorders when projects require the same edge appearance and dimensions.
The 15/16 inch width offers controlled overhang beyond the panel, which supports cleaner trimming operations and more uniform finished edges across multiple parts.
Rehau PVC edgebanding 301799-489 combines a 15/16 inch width, 1mm thickness, and PVC construction to support straightforward edgebanding on panel projects. The defined CP41673 EMB LAC designation and Rehau part number give a clear reference point when matching finishes across new builds or extensions. For shops planning consistent edge details, this Edge Banding product from Wurth Baer Supply fits directly into established panel-processing workflows.
Sold In: 1 Roll