Rehau PVC edgebanding 302044-129 is a PVC edge banding from Rehau, Inc. that covers and finishes exposed edges, so cabinet and furniture panels present a clean, professional look. The 15/16 inch width gives coverage over standard panel thicknesses with room for trimming, so edges can be flushed off after application without exposing the core. The 1mm thickness provides a solid edging layer, so corners feel substantial instead of sharp or fragile in everyday use. The 600 ft length, as stated in the SAP description 15/16X1MM C100163 LAC 600FT, supports longer runs or multi-piece jobs from a single reel, so runs on a job stay visually consistent. As an edge banding in the Edgebanding category, this product is suited to covering raw substrate edges where a durable, finished band is needed.
The 15/16 inch width referenced in the SAP description 15/16X1MM C100163 LAC 600FT gives a slight overhang beyond common panel thicknesses, so edge banding can be applied and then trimmed back for a flush finish. The 1mm thickness noted in the same description provides a moderate build, so it can be shaped and eased at the corner without feeling overly thin on the finished edge. As a PVC edge banding identified by Rehau, Inc., this product fits into workflows that standardize on PVC edging for cabinet and woodworking environments where a consistent synthetic edge is preferred. The continuous 600 ft length supports repetitive installation setups, so operators can maintain steady throughput on edgebanders or manual stations without frequent material changeover during runs.
The product name Rehau PVC Edgebanding, 302044-129, and its classification as Edge Banding indicate it is used on exposed panel edges in cabinetry and general woodworking. The 15/16 inch width from the SAP description 15/16X1MM C100163 LAC 600FT suits edging for panels where the face material needs a matching or coordinating edge, so casework sides, shelves, and doors can carry the same visual line around the perimeter. As a PVC edge banding from Rehau, Inc., it integrates into shop environments that standardize on PVC edging materials for cabinets, furniture components, and built-ins, so different parts in the project present a unified edge appearance. The long 600 ft run length stated in the description supports multi-cabinet or multi-room work, so a single reel can serve several cabinets or sections within a project while keeping the edge material consistent across those parts.
The 15/16 inch dimension in the 15/16X1MM C100163 LAC 600FT description provides enough coverage to handle minor panel size variation while still trimming back to a clean line, so installers can rely on repeatable flush trimming results along doors, drawer fronts, and carcass edges. The 1mm thickness in the same description strikes a balance between profile definition and handling, so edges can be lightly profiled or eased without losing the visual presence of the band at the corner. Being identified explicitly as PVC Edgebanding and Edge Banding means this material is designed to function as a defined edge layer, so finished parts maintain a consistent transition from face surface to edge band. The 600 ft length referenced for this Rehau 302044-129 edge banding helps shops plan continuous runs on automated or manual equipment, so setup time is spread over more linear feet of edging and panel sequences stay consistent from first part to last.
Rehau PVC edgebanding 302044-129 is an edge banding product in the Edgebanding category, so it is used to finish and protect exposed panel edges in cabinetry and woodworking projects.
Rehau PVC edgebanding 302044-129 has a 15/16 inch width and 1mm thickness as stated in the SAP description 15/16X1MM C100163 LAC 600FT, so it provides trim-friendly coverage for typical panel edges.
Rehau PVC edgebanding 302044-129 is specified in the SAP description as 600FT, so it supports extended edging runs or multiple cabinet sections from a single continuous length.
Rehau PVC edgebanding 302044-129 is produced by Rehau, Inc., so shops matching existing Rehau installations can specify this exact part number for consistent edging.
Rehau PVC edgebanding 302044-129 carries the Manufacturer Part # 302044-129 and is listed as Edge Banding, so purchasing and inventory systems can track it precisely.
Rehau PVC edgebanding 302044-129, classified under the Edgebanding category with 15/16 x 1mm dimensions, suits cabinet, casework, and furniture panel edges that need a finished synthetic band.
The Rehau PVC Edgebanding, 302044-129, combines a 15/16 inch width, 1mm thickness, and 600 ft length as specified in 15/16X1MM C100163 LAC 600FT, so it is configured for sustained cabinet and woodworking edge runs. As a PVC edge banding product from Rehau, Inc. in the Edge Banding class, it fits applications where consistent edging across panels is a priority. For jobs calling for this exact manufacturer reference, the 302044-129 identifier aligns purchasing, shop setup, and installation around the same defined edging material.
Sold In: 1 Roll