Rehau PVC edgebanding gives woodworkers a dedicated edge treatment for covering exposed panel sides, so raw board edges are concealed for a cleaner finished run across cabinet or furniture components. This Rehau, Inc. edgebanding is classified as Edge Banding in the Miscellaneous|Edgebanding category, which places it directly in the workflow of casework, shelving, and similar panel-based constructions where edge coverage is required on cut parts. The 15/16X1MM C600006 LAC 600FT description defines a 15/16 inch wide, 1mm thick PVC band in a continuous 600 foot length, allowing long, uninterrupted edging passes across multiple panels. That width gives coverage across typical 3/4 inch panel thickness with margin for precise trimming, while the 1mm thickness provides a defined edge profile at joints. The 600FT length supports production runs where consistent material is important from first panel to last.
The 15/16X1MM C600006 LAC 600FT specification means this Rehau PVC edgebanding is sized for straightforward handling on edge banding equipment, helping operators align the band over panel edges without struggling for coverage. The 15/16 inch width provides extra material beyond typical board thickness, letting installers trim to a flush edge rather than trying to align perfectly to the panel in a single pass. The 1mm thickness offers a stable profile as the band is pressed and trimmed, which supports consistent results as panels move through an edge banding machine or manual workflow. With a 600 foot continuous length, operators can run repeated pieces through the same setup, reducing mid-job material changes while maintaining identical edge dimensions.
The Rehau PVC edgebanding, listed under Miscellaneous|Edgebanding and Edge Banding, is suited to panel-based woodworking such as cabinets, casework, and shelving where exposed substrate edges require coverage. The 15/16 inch width aligns well with 3/4 inch board construction that needs a slight overhang for trimming, so cut-to-size panels can be processed without resizing the band. The 1mm thickness gives a noticeable but controlled edge, which works on vertical cabinet sides, shelves, and interior partitions that see regular contact. The 600FT length allows a single roll to cover multiple carcasses or room sets, supporting layouts where many pieces share the same edge treatment and must look consistent when installed together in a project.
The defined 15/16X1MM C600006 LAC 600FT size lets shops standardize edge banding setups around this Rehau PVC edgebanding, reducing adjustment time between different materials. The 15/16 inch width builds in tolerance for small alignment variances at the feed, so trimming operations can bring the finished edge to the panel face instead of relying on perfect tracking at application. The 1mm thickness gives trimmers and scrapers a predictable amount of material to work with, helping operators maintain even pressure and avoid cutting back into the core panel. With 600FT available on a single roll, production can stay on one material specification for longer runs, which supports uniform edge appearance across matching fronts, ends, and shelves built from the same Rehau edge banding.
The Rehau PVC edgebanding uses manufacturer part number 302044-133, giving a precise reference when specifying, ordering, or matching this exact edge band for future projects.
The edgebanding is 15/16 inch wide, providing coverage across typical panel thickness with extra margin that can be trimmed back for a flush, clean finished edge.
The Rehau 302044-133 edge band is 1mm thick, creating a defined edge layer that supports consistent trimming and a clear transition at the panel perimeter.
The edgebanding is specified as 600FT, so shops can run multiple cabinet or furniture components from one continuous length without frequent material changes.
This product is described as Rehau PVC edgebanding, using a PVC edge material that integrates into common woodworking edge banding operations.
The Rehau PVC edgebanding covers exposed panel edges, so casework, shelving, and similar constructions present a finished look instead of raw board edges on visible surfaces.
This Rehau PVC edgebanding, with its 15/16X1MM C600006 LAC 600FT specification and 302044-133 part number, gives shops a defined edge material for covering exposed panels on cabinet and furniture work. The combination of 15/16 inch width, 1mm thickness, and 600FT length supports repeatable, production-oriented edging where multiple parts share the same edge profile. For projects using panel construction from Wurth Baer Supply materials, this dedicated Rehau, Inc. Edge Banding provides a clear option when a PVC edge treatment is required across visible board edges.
Sold In: 1 Roll