Rehau PVC edgebanding 302044-140 provides a PVC edge banding solution that finishes exposed panel edges so they present a uniform, usable surface on cabinets and furniture parts. The 15/16 inch width stated in the SAP description gives coverage across typical 3/4 inch panel edges with room for trimming, which helps installers achieve a flush edge after machining. The 1mm thickness noted in the SAP description creates a solid edge profile that stands up to normal handling during assembly work. PVC material referenced in the product name delivers a consistent, machinable edge that works smoothly with common edge banding equipment during trimming and flush-routing steps. The manufacturer part number 302044-140 identifies this specific Rehau, Inc. edgebanding variant, which matters when matching previous jobs or ordering again for repeat work.
The 15/16 inch width called out in the SAP description gives edge banding coverage beyond the face of common panel thicknesses, allowing installers to set up applicators so the band slightly overhangs for trimming passes. The 1mm thickness identified in the SAP description provides enough material for reliable adhesion and follow-up machining without feeling bulky on the edge. The 600FT length stated in the SAP description means fewer coil changes during production runs, which keeps cabinet or furniture edging moving with less interruption at the machine.
The product class Edge Banding places this Rehau, Inc. PVC edgebanding 302044-140 in the role of covering raw panel edges on casework, shelving, and similar components. The 15/16 inch width in the SAP description suits edging for panels around cabinet thickness, allowing installers to center the tape over the edge and still have trimming allowance. With a 1mm thickness, as detailed in the SAP description, the banding forms a clear transition from panel face to edge, which helps maintain a consistent look across cabinet doors, drawer fronts, and carcass parts. The PVC material identified in the product name supports routine routing and scraping operations after bonding, letting shops dial in flush or slightly radiused profiles that match surrounding components.
The manufacturer part number 302044-140 lets shops specify the same Rehau PVC edgebanding again when matching previous installations, which is important when finishing add-on cabinets or replacement parts later. The 600FT coil length from the SAP description supports longer production runs on automated or manual edge banders, reducing downtime from frequent coil changes and helping maintain consistent setup from the first panel to the last. Because the SAP description fixes the dimensions at 15/16 inch by 1mm, operators can standardize trimmer and router settings around this size, which reduces test cuts and keeps results consistent across shifts or locations. The product class Edge Banding clarifies that this material is intended specifically for edge finishing tasks in woodworking environments, which aligns it with typical cabinet shop workflows.
Rehau PVC edgebanding 302044-140 is specified in the SAP description as 15/16 inch wide by 1mm thick, giving coverage for common cabinet panels with material for trimming.
Rehau PVC edgebanding 302044-140 is identified as PVC in the product name, providing a machinable plastic edge that works well with typical woodworking trimming equipment.
Rehau PVC edgebanding 302044-140 lists 600FT in the SAP description, supporting extended edging runs on cabinet and furniture projects before changing coils.
The Rehau PVC edgebanding, 302044-140, is attributed to Rehau, Inc., aligning it with that manufacturer part number for future reorders and specification work.
Rehau PVC edgebanding 302044-140, at 15/16 inch by 1mm, suits finishing exposed edges on cabinet-grade panels where trimming back to a clean line is required.
The 1mm thickness recorded in the SAP description gives Rehau PVC edgebanding 302044-140 enough material for dependable adhesion and trimming without producing an overly heavy edge.
Rehau PVC edgebanding 302044-140 combines a 15/16 inch width, 1mm thickness, and 600FT length, as stated in the SAP description, to support efficient cabinet and furniture edge finishing. Choosing this Rehau, Inc. edge banding lets shops align material dimensions with common panel work while keeping part numbers consistent for future jobs.
Sold In: 1 Roll