Rehau PVC edgebanding 302044-141 is a PVC edge banding product from Rehau, Inc. that covers and protects exposed panel edges, so cabinet and furniture projects present a finished, uniform look along every run. The 15/16 inch width stated in the description gives coverage across common panel thicknesses with enough margin to trim flush, which supports clean lines on doors, shelves, and casework after machining. The 1mm thickness specified in the description provides a substantial edge layer that can be processed with standard edgebanding equipment, helping the edge stand up to typical shop handling during cutting and routing. The description reference to C500141 LAC identifies the specific design variant, which lets shops match this edgebanding consistently across jobs that use the same code. The 600 foot length stated in the description offers extended continuous runs for production work, which reduces changeovers during repeated edging operations.
The 15/16 inch width stated in the description gives installers room to align the strip over the panel edge with slight overhang, so edgebanders and trimmers can bring both faces flush without leaving gaps. The 1mm thickness specified in the description provides enough PVC mass for adhesive bonding and post-processing, so the edge can be machined, trimmed, and detailed using standard edgebanding tools and settings. The reference to 600 feet in the SAP description indicates an extended coil length, which allows long continuous feeds through automated equipment, helping maintain steady throughput during repetitive edging work.
The product name Rehau PVC Edgebanding, 302044-141 identifies this item as edge banding designed to finish exposed board edges, so it fits into cabinet, furniture, and casework builds where raw substrate edges need a matching surface. The category listing as Edgebanding positions it within typical edge-finishing workflows, where material is applied along vertical and horizontal edges of doors, drawer fronts, and interior components. The 15/16 inch width from the description covers common panel thicknesses used in woodworking, so it can be centered on the edge and then trimmed clean on both faces. With a 1mm thickness noted in the description, the PVC strip offers a defined profile at the edge, supporting a solid feel when components are handled.
The combination of 15/16 inch width and 1mm thickness stated in the SAP description shapes how the material behaves through edging equipment, giving a balance between coverage and manageable trimming, so installers can dial in consistent passes on production runs. The 600 foot length shown in the description extends that consistency across many parts, because the same coil can be used throughout a batch, helping edges on doors, shelves, and panels match one another across the project. The repeated use of the 302044-141 identifier in the product and manufacturer references anchors this edgebanding to a specific design code, so when a shop standardizes on this number, replacement or expansion work can draw on the same edge material profile and appearance.
Rehau 302044-141 is a PVC edgebanding product, so it is used to cover exposed panel edges in cabinet, furniture, and general woodworking projects that require a finished edge surface.
The SAP description lists this edgebanding as 15/16 inch wide and 1mm thick, giving coverage across common panel thicknesses with enough material for trimming and edge finishing operations.
The 600 foot length stated in the description provides a long coil for extended edging runs, which supports continuous processing of multiple parts with fewer material changes during production.
The 302044-141 part number in the product and manufacturer references identifies this specific Rehau PVC edgebanding variant, helping shops reorder the same edge material for future jobs.
The 1mm thickness listed in the description gives a substantial PVC layer at the edge, so it can be bonded, trimmed, and detailed using typical edgebanding machines and hand finishing tools.
As a PVC edgebanding in the Edgebanding category, this product fits on exposed edges of doors, drawer fronts, shelves, and casework where a finished edge appearance is needed.
The product name Rehau PVC Edgebanding, 302044-141 and the SAP description 15/16X1MM C500141 LAC 600FT define a specific edge banding profile, so projects can be planned around known width, thickness, and length. For shops setting up cabinet or furniture runs that call for PVC edge treatment, these defined dimensions and identified part number support consistent selection whenever this edge profile is required.
Sold In: 1 Roll