Rehau PVC edgebanding 302044-181 is a PVC edge banding designed to cover and protect exposed panel edges on casework, shelving, and similar projects. The edgebanding uses a PVC material, so it creates a uniform, machinable edge that works well in typical shop operations. The SAP description identifies a 15/16 inch width and 1mm thickness, giving enough coverage for common panel tolerances while keeping the edge slim. That 1mm thickness supports a solid-feeling edge that still trims easily with standard woodworking tools. The description also specifies a C700201 EMB LAC identification, which ties the edgebanding to a defined finish and texture in the Rehau system for visual consistency across multiple pieces. A 600 foot length in the SAP description supports longer runs of cabinets, closets, or fixtures without frequent roll changes, which keeps production moving smoothly on repetitive jobs.
The 15/16 inch width listed in the SAP description gives fabricators a practical amount of overhang on common panel thicknesses, which simplifies setup on banding equipment and leaves material for a clean trim. The 1mm thickness works well with typical edgebander settings, so operators can dial in pressure and trimming for a smooth edge without excessive passes. Because the material is PVC, it responds predictably to common edge-banding adhesives and finishing steps used in woodworking shops. The defined C700201 EMB LAC designation helps installers select this banding when they need to visually align edges with matching components that reference the same Rehau identifier. Over a 600 foot length, shops can set up a run and keep the same settings across many parts, supporting consistent edges from the first part to the last.
This Rehau PVC edgebanding, identified by manufacturer part 302044-181, fits projects that call for PVC edge protection on engineered panels. The 15/16 inch width from the SAP description suits work on cabinets, casework, and shelving where the panel thickness is near 3/4 inch and a small overhang is needed. The 1mm thickness integrates naturally into standard shop workflows, from single-piece residential units to commercial runs, because it balances edge strength with efficient trimming. The C700201 EMB LAC designation links the edge banding to a specific finish profile, making it a match for jobs that specify that Rehau finish in drawings or cut lists. With a 600 foot length noted in the description, this banding supports production sequences where many doors, drawer fronts, or panels share the same edge material, which helps keep visual and dimensional results consistent across the project.
The defined 15/16 inch by 1mm sizing in the SAP description allows shops to standardize bander setup, because the same width and thickness can be run across many parts without constant adjustment. That consistency reduces rework when trimming flush edges on cabinets or fixtures. The PVC material described in the product name gives a stable, predictable cut on typical woodworking equipment, which supports clean corners and smooth edge transitions. The C700201 EMB LAC identifier helps designers, engineers, and installers reference the same finish, so a replacement door or panel can match a previous installation tied to 302044-181. The 600 foot length described for this Rehau PVC edge banding roll lets crews plan an entire run of cabinets or shelving with a single material choice, reinforcing uniform color, texture, and edge feel from piece to piece on the job.
Rehau PVC edgebanding 302044-181 is described as 15/16 inch wide and 1mm thick, giving slight overhang on typical 3/4 inch panels while providing a solid but easily trimmable edge.
The 600 foot length in the SAP description supports longer production runs, so multiple cabinets, doors, or shelves can be banded from one roll for consistent results.
The C700201 EMB LAC designation in the SAP description ties this PVC edge banding to a defined Rehau finish and embossing, supporting visual consistency across matching components.
Rehau 302044-181 edge banding is identified as PVC, which gives a uniform synthetic edge suitable for machining and typical shop handling on panel projects.
The 1mm thickness described in the SAP data provides enough material for a substantial edge while still trimming smoothly with standard edge banders and routers.
The manufacturer part number 302044-181 identifies this exact Rehau PVC edgebanding, helping shops match finish and size when repeating or extending existing jobs.
Rehau PVC edgebanding 302044-181 combines a 15/16 inch width, 1mm thickness, and PVC construction to support clean, repeatable edges on panel-based projects. The C700201 EMB LAC designation and 600 foot length described in the SAP data help keep finish, texture, and sizing consistent across multiple cabinets, doors, or shelves. For work that references this specific Rehau identifier, the defined dimensions and finish coding simplify material selection and support uniform results from the first piece to the last.
Sold In: 1 Roll