Rehau PVC edgebanding gives you a defined edge treatment for panels where a PVC edge is required, so you can finish exposed panel edges with a consistent material from the same manufacturer. The product is identified as Rehau PVC Edgebanding, 302044-192, which ties directly to the manufacturer part number when you are matching existing work or documentation. The 15/16 inch width stated in the SAP description covers standard panel thickness with overhang for trimming, which helps you flush-trim to a clean line on cabinets or casework. The 1mm thickness noted in the description provides a measurable edge profile, which matters when you want a substantial edge rather than a very thin tape look. The reference to PVC in the name defines the material type, so you can align this edge with other PVC-based components in the job.
The 15/16 inch width stated in the SAP description gives you a clear dimension when setting up your edgebander or hand-trim workflow, because you know the banding will overhang typical panel thicknesses before trimming. The 1mm thickness also described in the SAP data defines how much material you are working with at the edge, which matters when choosing cutters and setting trim depth on an edgebander. The designation HIGHGLS in the SAP description points to a high gloss surface, so you can pay attention to handling and trimming steps that respect a glossy face. The manufacturer part number 302044-192 ties this PVC edge banding directly to Rehau documentation, which supports consistent reordering when you standardize on this specific code.
The Category entry of Miscellaneous|Edgebanding and Product Class Edge Banding define this item as edge treatment for panel work, so you can apply it to exposed panel edges on cabinets, fixtures, or similar constructions that call for PVC edges. The 15/16 inch width from the SAP description gives you coverage suitable for many panel thicknesses used in woodworking, allowing you to center the band and trim to a flush finish on both faces. The 1mm thickness stated in the SAP description delivers a measurable edge, which suits applications where you want a noticeable PVC edge band rather than a micro-thin film. The HIGHGLS notation in the SAP description means the surface is high gloss, which fits projects that use glossy faces and need a matching edge sheen along doors, drawer fronts, and visible carcass edges.
The 600FT length in the SAP description offers an extended run of the same Rehau PVC edgebanding, which supports consistent appearance across multiple cabinets or case parts under a single job number. The combination of 15/16 inch width and 1mm thickness gives you predictable setup parameters for an edgebander, because the banding size is fixed by the SAP-described dimensions. The C100142 reference in the SAP description links this edge banding to a defined Rehau program, which helps you keep finishes and designs aligned whenever drawings or part lists specify that reference. The manufacturer part number 302044-192 and the Web Description code WBSC - 1432 - RU302044-192 both point to the same specific item, which simplifies communication between design, purchasing, and the shop floor when this exact PVC edge band is required.
Rehau PVC edgebanding, 302044-192, is identified as PVC, so it matches projects that call for PVC edge material along exposed panel edges.
The SAP description lists 15/16 inch width, giving coverage for common panel thicknesses with enough overhang for trimming to a flush finished edge.
The SAP description notes a 1mm thickness, providing a defined PVC edge profile that works well where a noticeable banded edge is desired.
The term HIGHGLS in the SAP description indicates a high gloss surface, supporting applications that use glossy panels and need a matching edge sheen.
The SAP description specifies 600FT, giving a long, continuous length suitable for multi-part cabinet or fixture runs using the same code.
This C100142 high gloss edgebanding is tied to Rehau manufacturer part number 302044-192 and the Web Description WBSC - 1432 - RU302044-192 for consistent ordering.
The SAP description 15/16X1MM C100142 HIGHGLS LAC 600FT and manufacturer part number 302044-192 clearly identify this Rehau PVC edgebanding, so you can specify this exact high gloss, 1mm-thick band for projects that call for these dimensions. The 600FT length supports jobs with multiple cabinets or repeated parts under one material choice. For work requiring a high gloss PVC edge at 15/16 inch width and 1mm thickness, this Rehau code provides a single, repeatable reference.
Sold In: 1 Roll