Rehau PVC edgebanding is an edge banding solution designed to finish exposed panel edges in woodworking projects. This Rehau, Inc. product is categorized as edge banding, so it is intended for covering raw substrate edges where a durable edge detail is needed on cabinets, fixtures, or furniture panels.
The product is identified as Rehau PVC Edgebanding, 302044-194, which ties directly to the manufacturer part number 302044-194. Using the exact part number helps match this edgebanding to existing jobs, samples, or specifications that already reference this code.
The SAP description 15/16X1MM C500234 EMB LAC 600FT shows that this edgebanding is 15/16 inch wide and 1mm thick, giving you a strip sized for typical panel thickness coverage while maintaining a modest edge profile for everyday shop work.
The same description confirms a 600ft length, which supports longer production runs or multiple small projects without frequent changeovers. The C500234 EMB LAC designation identifies the specific finish or style within the Rehau line, allowing consistent visual results across repeat work.
The 15/16 inch width stated in the SAP description allows this Rehau PVC edgebanding to span typical 3/4 inch panel thickness with a bit of overhang, which supports clean trimming on manual or automatic edgebanders.
The 1mm thickness specified for this edge banding shapes how the edge feels and how it cuts, giving installers a defined arris that can be flushed and lightly eased without quickly sanding through the material.
The 600ft length value signals that this product is supplied in a continuous run suitable for shop environments where longer, uninterrupted strips are useful for full cabinet runs, tall panels, or repeated parts within a project set.
This product is categorized by Wurth Baer Supply as edge banding, aligning it with applications where exposed panel edges need to be finished in woodworking and casework production. The 15/16 inch width described in the SAP data positions it for work on panels where a standard thickness core is used, leaving workable overhang at both faces for trimming stations.
The 1mm thickness called out in the SAP description gives the edge a measurable profile compared with ultra-thin tape, which suits shop situations where the edge needs to stand up to everyday handling while maintaining a consistent line along doors and drawer fronts. Because the length is specified at 600ft, the same roll can typically serve multiple related projects or an entire room set, helping maintain visual continuity across every panel drawing from this part number.
The labeling C500234 EMB LAC identifies a particular finish variant, which matters when coordinating this Rehau PVC edgebanding against other components ordered with the same reference. The combination of the Rehau brand, the edge banding category, and the specific part number 302044-194 links this product directly to drawings or cut lists where that exact number appears, helping the shop floor pull the right material without re-interpretation.
The clearly stated 15/16 inch by 1mm dimensions in the SAP description give edgebander operators fixed expectations for setup, which supports repeatable trimming and scraping passes from job to job. When the same size is used consistently, settings for pressure rollers and cutters can remain more stable, reducing trial cuts during production.
The 600ft length value supports longer sequences at the machine, which in turn reduces downtime between runs when swapping rolls, helping maintain a steadier workflow once feed speed and temperature settings are dialed in for this Rehau PVC edgebanding. Because the part number is precisely defined as 302044-194, purchasing and production can communicate using the same identifier, minimizing mix-ups when multiple finishes or thicknesses exist in the same storage area.
The edge banding classification and Rehau branding within Wurth Baer Supply data signal that this material sits within a recognized line of PVC edgebanding products, which helps shops standardize material choices across similar projects. The detailed SAP description 15/16X1MM C500234 EMB LAC 600FT keeps all critical dimensions and style cues in one string, supporting accurate entry on orders, cut lists, or inventory records.
Rehau 302044-194 PVC edgebanding is described as 15/16X1MM, indicating a 15/16 inch width and 1mm thickness, which suits standard panel edges with enough material for trimming operations.
This Rehau PVC edgebanding is listed as 600FT in the SAP description, providing a continuous length suitable for longer cabinet runs or multiple projects from the same roll.
The C500234 EMB LAC code in the SAP description identifies a specific style designation within the Rehau PVC edge banding line, supporting consistent appearance when the same code is specified.
Rehau 302044-194 is classified by Wurth Baer Supply as edge banding, so it is intended for finishing exposed edges on panels in woodworking and related projects.
This PVC edgebanding is produced by Rehau, Inc., as indicated by the brand and manufacturer part number 302044-194, which aligns purchasing and production with the same source reference.
The 1mm thickness specified in the 15/16X1MM description provides a defined edge profile, supporting clean trimming and light edge easing without quickly removing the working surface.
The defined dimensions 15/16X1MM and the 600FT length in the SAP description give this Rehau PVC edgebanding a clear role in shop workflows, from setup through trimming. Matching the manufacturer part number 302044-194 and the C500234 EMB LAC designation to your drawings or cut lists helps keep edge details consistent across every panel. For projects built around this specific size and style reference, ordering Rehau PVC edgebanding through Wurth Baer Supply aligns field results with the documented specification.
Sold In: 1 Roll