Rehau PVC edgebanding 302044-195 is a PVC edge banding product from Rehau, Inc. that finishes exposed panel edges on casework and furniture, giving raw board edges a consistent, manufactured look across a run of parts. The 15/16 inch width from the SAP description "15/16X1MM C700214 EMB LAC 600FT" covers standard 3/4 inch panels with overhang, allowing installers to trim back to a crisp line. The 1mm thickness from the same description provides a solid edge profile that stands up to normal handling in woodworking environments while still working smoothly with common edgebanding tools. The 600FT length noted in the SAP description supplies a continuous coil for longer production runs, reducing splice points and keeping edge color and texture consistent from part to part.
The SAP description "15/16X1MM C700214 EMB LAC 600FT" confirms that this Rehau PVC edgebanding is supplied in a 15/16 inch width, giving coverage and trim allowance when edging typical 3/4 inch sheet goods. The 1mm thickness specified in the same description yields an edge that presents a defined profile once trimmed and flushed, which is useful where an installer wants a solid-feeling edge rather than a very thin tape. The 600FT length indicated in the SAP description provides enough material to run multiple cabinets or fixtures from a single coil, supporting consistent appearance across a full project or small batch production.
The product class "Edge Banding" identifies this item as a finishing strip for exposed panel edges, so it fits directly into cabinet, furniture, and fixture builds that rely on sheet goods. The 15/16 inch width in the SAP description "15/16X1MM C700214 EMB LAC 600FT" exceeds nominal 3/4 inch material width, giving working room to align the band on the substrate and then trim to a clean edge. That extra coverage helps when sheet edges are slightly out of tolerance, because the banding still spans the full thickness before flush trimming. The 1mm thickness from the same description creates an edge presence that pairs well with panels where a defined, durable-feeling edge detail is preferred over ultra-thin tape.
The brand identification "Rehau, Inc." links this PVC edgebanding to a recognized manufacturer of edge banding products, which helps shops align this coil with existing Rehau-based finish schemes on repeat work. The manufacturer part number 302044-195 gives installers and purchasing the same hard reference, so reorders pull the identical PVC edgebanding and preserve color and texture continuity across phases of a project. The combined SAP description "15/16X1MM C700214 EMB LAC 600FT" keeps critical dimensions and the C700214 EMB LAC designation inside a single code, simplifying communication between design, purchasing, and the shop floor. Using this single identifier during planning and production supports fewer mixups between different widths or thicknesses of edgebanding in busy woodworking environments.
Rehau PVC edgebanding 302044-195 is an edge banding product designed to finish exposed panel edges, so it serves as the visible edge on cabinets, furniture, and other sheet-good constructions.
Rehau PVC edgebanding 302044-195 uses the SAP description "15/16X1MM C700214 EMB LAC 600FT," which states a 15/16 inch width, 1mm thickness, and 600 foot length for planning coverage.
Rehau PVC edgebanding 302044-195 in 15/16 inch width from the SAP description covers standard 3/4 inch panels with trim allowance, supporting precise flush trimming on cabinet and furniture edges.
Rehau PVC edgebanding 302044-195 with 1mm thickness from the SAP description provides a defined, solid edge profile that feels substantial on finished parts in woodworking environments.
Rehau PVC edgebanding 302044-195 is identified with a 600FT length in the SAP description, giving shops extended run capability and consistent edging across multiple pieces from one coil.
Rehau PVC edgebanding 302044-195 uses manufacturer part number 302044-195 and the SAP description together, so purchasing and installers reference the same defined edgebanding in project documentation.
Rehau PVC edgebanding 302044-195 from Wurth Baer Supply combines a 15/16 inch width, 1mm thickness, and 600FT length in one clearly identified product, simplifying how you specify and stock edge banding for casework runs and repeat woodworking projects.
Sold In: 1 Roll